Re: [microblaze-uclinux] SystemACE mount on S3MB1500 fails

[Marco Cavallini <arm.linux@xxxxxxxxxxxxxxxx>]

> I used systemace several months ago, so I'm not sure but I think to
> remember that you
> have to configure the FPGA from the systemace file in the compact flash
> in order to
> access the compact flash from ucLinux. If we are talking about Memec
> 3S1500 evaboard
> I had problems with reset, so I had to keep the FPGA reset pushed during
> systemace
> configuration (AC25 on the board reset, not systemace reset!).
> After that you should mount the compact flash successfully, I suggest
> you to start
> mounting the card read-only. If the system hangs when you mount the card
> read-write
> try a patch I posted some months ago on this list.

Please note that CF currently works when I copy image.bin ffrom CF to
ram, but not after linux has booted.
I tried it yesterday your patches without success: nothing changes.

Thank you
ciao
-- 
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
www.koansoftware.com    |    www.klinux.org
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/