[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[microblaze-uclinux] Regarding bootloader error

To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: [microblaze-uclinux] Regarding bootloader error
From: "Kunal Kishore" <kunalpatna@xxxxxxxxx>
Date: Fri, 26 May 2006 10:18:38 +0530
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=SEYnd+u2Or4MNzkPmtmwfKzkjOFt5lO8tRMDYZ+zuk1VAX7CdAXBa9Z+cowwNB5MStcATSHJC4c9NapP3DmudmofxMpS/NYOYxLtJRk++g/4SXcWOoqi1TRLz2RKr9x/BL5RBN93o6yBGFt6FMxcCQpHBoxMnwCMWXVevTE7Epc=
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx

Hi Sweta,

In your reply you have mentioned about enabling auto convert.How to do it.One more problem is that image file is loaded into SRAM and not in flash as while building the project it doesn't detect any flash in the board.Changing the flash option in"software platform settings" from "none" to SRAM with same start address will do ? So I tend to agree more with your second answer that there is some problem with the board.Do you think I should go for some other board like the one from Nu-Horizon where the flash is supported by the base builder system.

Waiting for your reply.

Regards,

Kunal Kishore

Follow-Ups:
- RE: [microblaze-uclinux] Regarding bootloader error
  - From: sweta
- RE: [microblaze-uclinux] Regarding bootloader error
  - From: sweta

Prev by Date: [microblaze-uclinux] Hello
Next by Date: RE: [microblaze-uclinux] Regarding bootloader error
Previous by thread: [microblaze-uclinux] Hello
Next by thread: RE: [microblaze-uclinux] Regarding bootloader error
Index(es):
- Date
- Thread