Hi Kunal,
If
Actually can u please tell me which Flash u r going to use ?
(NAND or NOR or manufacturer’s name) ?
If Flash IC is gone, it won’t be
detected as per my knowledge. Please try on other board. Or
changing the Flash of the same board with proper care.
About auto conversion option, u will have
to tell me how u write to flash(programming flash).
Depending on that u will get option for this.
It would come in Base system Builder
itself.
Tools-> program Flash memory ->
file to program – image.elf
þ
Auto convert to SREC
format from elf.
Did u get my point? Feel free to ask if u
don’t get it.
Regards,
Sweta
Bhatt
Embedded Engineer |
eInfochips.
contact - sweta.bhatt@xxxxxxxxxxxxxx |
+919898833805
-----Original Message-----
From:
owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of Kunal Kishore
Sent: Friday, May 26, 2006 10:19
AM
To:
microblaze-uclinux@xxxxxxxxxxxxxx
Subject: [microblaze-uclinux]
Regarding bootloader error
Hi Sweta,
In your reply you have mentioned about enabling auto
convert.How to do it.One more problem is that image file is loaded into SRAM
and not in flash as while building the project it doesn't detect any flash in
the board.Changing the flash option in"software platform settings"
from "none" to SRAM with same start address will do ? So I tend
to agree more with your second answer that there is some problem with the
board.Do you think I should go for some other board like the one from Nu-Horizon
where the flash is supported by the base builder system.
Waiting for your reply.
Regards,
Kunal Kishore