RE: [microblaze-uclinux] It sounds stupid but ... I cannot login !

["Akiva Sadovski" <akivas@xxxxxxxxxx>]

OK,
  i feel a need to clarify some issues:
1) I'm building uClinux at Win32 machine under Cygwin
2) I've selected "uclinux-auto" in "Vendor/Procuct selection" submenu of
"make menuconfig"
	2.1) While creating the uClinux image, i did all changes listed out
      in "Creating a simle uClinux ready MicroBlaze design" tutorial
      2.2) And in addition to these changes, also removed in
      "Input core support" Keyboard support / Mouse support
      (to get rid of compilation error in uClinux-2.4.x\drivers\input\keybdev.c)
such as:
-----------------------------------------
drivers/input/inputdrv.o: In function `keybdev_event':
/cygdrive/c/ucLinux/uClinux-2.4.x/drivers/input/keybdev.c(.text+0xc4c): undefine
d reference to `emulate_raw'
/cygdrive/c/ucLinux/uClinux-2.4.x/drivers/input/keybdev.c(.text+0xc84): undefine
d reference to `keyboard_tasklet'
/cygdrive/c/ucLinux/uClinux-2.4.x/drivers/input/keybdev.c(.text+0xc8c): undefine
d reference to `keyboard_tasklet'
/cygdrive/c/ucLinux/uClinux-2.4.x/drivers/input/keybdev.c(.text+0xca4): undefine
d reference to `keyboard_tasklet'
/cygdrive/c/ucLinux/uClinux-2.4.x/drivers/input/keybdev.c(.text+0xcb4): undefine
d reference to `keyboard_tasklet'
drivers/input/inputdrv.o: In function `uinput_exit':
/cygdrive/c/ucLinux/uClinux-2.4.x/drivers/input/uinput.c(.text.init+0x80): undef
ined reference to `kbd_ledfunc'
/cygdrive/c/ucLinux/uClinux-2.4.x/drivers/input/uinput.c(.text.init+0x88): undef
ined reference to `kbd_refresh_leds'
drivers/input/inputdrv.o: In function `keybdev_init':
/cygdrive/c/ucLinux/uClinux-2.4.x/drivers/input/keybdev.c(.text.exit+0x60): unde
fined reference to `kbd_ledfunc'
make[1]: *** [linux] Error 1
make[1]: Leaving directory `/cygdrive/c/ucLinux/uClinux-2.4.x'
make: *** [linux] Error 1
-----------------------------------------

3) For me, the fact that I see at the console
(none) login:
  instead of 
uclinux-auto login:
  is rather suspicious
4) When I tried to load the uClinux image providing the init=/bin/sh parameter 
to the kernel,

XMD% Downloading kernel image...
XMD% This will only take a few seconds!
XMD% XMD% setting kernel command line
XMD% init=/bin/sh
XMD% "cmdline is init=/bin/sh"

the system got stuck - no response ...

thanks a lot,
    Akiva Sadovski
  Scopus Video Networks

-----Original Message-----
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx]On Behalf Of Marco
Cavallini
Sent: Wednesday, June 07, 2006 6:50 PM
To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] It sounds stupid but ... I cannot
login !


Akiva Sadovski ha scritto:
> Hi,
>   i'm terribly sorry, but I'm a newbee in Linux, uClinux and MicroBlaze... so I'm asking about the very basic things:
> 
> My board: Memec's Spartan 3 dev board.
> I've managed to build the uClinux from the sources obtained from the uClinux CVS server and to download the image.bin
> to the board.
> However, the only output at the console (board's RS-232 port) was:
> 
> (none) login: 
> 
> instead of lots of regular Linux printouts. Moreover, I've tried different username/password combinations, such as:
> root/root, root/defaul, root/uClinux etc - no one seems to work
> 
> Can anyone explain what has gone wrong ?

which configuration are you using ?
here on my MicroBlaze is

uclinux-auto login: root
Password: root

-- 
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
www.KoanSoftware.com   |    www.KaeilOS.com
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/