Re: [microblaze-uclinux] EDK 7.1 under cygwin

[John Kent <jekent@xxxxxxxxxxxxxxxx>]

Hi Nuno,

Can't afford it ...

EDK 7.1 was bought for me through work as something I could spend a bit 
of time working on at home.
I have the Memec Design V4FX12LC board, which I got as part of an Xfest 
2005 promotional deal.
The idea was to use it to interface to a GPS receiver and do some signal 
processing.
At the moment work has gone quiet so the finances are a bit limited.
(I'm working part time as a contractor due to ill health)

I'm hoping to develop some IP for the Spartan 3E board and the Digilent 
VDEC-1 video digitizer board.
I worked at CSIRO Manufacturing Science and Technology in the 90s 
working on Machine Vision systems using the 4000 family FPGAs, so have a 
few things I would like to try out from when I was working on there.

I have developed a 6809 core on the Spartan 2e and Spartan 3 along with 
6850 compatible UART 6821 PIA and a text based VDU. I have had one 
inquiry from a guy at a University in the UK who wanted to use my 6809 
core as an ethernet controller because the University would not buy him 
EDK, so I'm not alone having difficulty affording it.

My FPGA project page is here:
http://members.optusnet.com.au/jekent/FPGA.htm

I hope I did not sound too abrupt in my last email, but it took me a bit 
of time to burn the CentOS 4.3 disks and install every thing. I 
appreciate any help anyone can give me.  I've managed to burn CentOS 
3.7, so I'll give that a go.

John.

nuno pinto wrote:
> that's weird because I installed EDK 8.1 in CentOS 4.3 sucesseful.. 
> can't you try a more recent version of EDK?

--
http://members.optushome.com.au/jekent

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/