Re: [microblaze-uclinux] Error when processing wget

["Qichen Huang" <huangqichen@xxxxxxxx>]

Hi John,
The kernel was check out last week.
That is a Xilinx OPB Ethernet MAC.
BTW, the download speed is not quite stable. When switched to 100Mbps,
running MicroBlaze at 75MHz, the download speed dosen't improve at
all.
Regards,
Qichen

On 9/14/06, John Williams <jwilliams@xxxxxxxxxxxxxx> wrote:
> Hi Qichen,
>
> Qichen Huang wrote:
>
> > I'm using uclinux 2.4.x on Xilinx Spartan 3E starter kit.
> > When trying to download some large files (2 ~ 30 Mbyte) from an http
> > server to the memory disk using wget, the process might quit
> > abnormally sometimes, with one of the following error messages:
> > "get: network read error: Bad file descriptor" or "get: write error:
> > Bad address" or "get: network read error: Invalid argument".
>
> Which ethernet device and driver are you using?  Are you using a recent CVS kernel?
>
> Regards,
>
> John
>
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/