[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] Downloding image file

Unfortunately, I'm only slightly ahead of you.  I'm actually having a
very simular problem.  Are you using the XUPV2P board?



But when I tried to download the image using XMD debugger, it gave below
error.

ERROR: MDT- microblaze pipeline stalled executing instruction at >>PC:
0x00000010

Try resetting the processor to continue..



Did you load the image at address 0x000000000 or something else like
x30000000?  I get the a simular message, but my PC is much further
from my starting point.  I actually see uClinux booting up until it
tries to 'Freeing init memory' when it freezes and XMD gives me this
message.



My hardware passes memory test and also I have marked bootloop for bram
initialization.

I am using EDK 8.2SP2 and Microblaze version 5.00.c. Is this configuration
supports uClinux 1.00.d.?


I'm using EDK 8.1 SP2 in MBv 4.something. I don't know if 5.00c is
supported but I'm sure John Williams could answer this question.

You may want to repost you message to the entire group.

Sorry if I wasn't much help,

David
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/