Hello David,
I have tried „make
clean”, “dep” and “all” to force generate telnetd
binary.
The
‘[*] telnetd does not use openpty()' option
is marked.
I still get the same error:
> > telnetd: getpeername: Socket operation on non-socket
How did you get telnetd
working?!
Thanks and regards,
Raul
That was it, Steve; thanks!
David Banas
Field Applications Engineer
Nu Horizons Electronics Corp.
2070 Ringwood Avenue
San Jose, CA 95131
(408)434-0800 - office
(415)846-5837 - cell
http://www.nuhorizons.com
> -----Original Message-----
> From: owner-microblaze-uclinux@xxxxxxxxxxxxxx [mailto:owner-microblaze-
> uclinux@xxxxxxxxxxxxxx] On Behalf Of Steve Sanders
> Sent: Friday, May 06, 2005 9:59 AM
> To: microblaze-uclinux@xxxxxxxxxxxxxx
> Subject: RE: [microblaze-uclinux] telnetd: All network ports in use.
>
> David -
>
> You may need to force a rebuild of "telnetd". I had a similar issue
> that I recently cleared up. You've already built telnetd w/o the
> "openpty" option checked. Checking it may not be initiating a re-build
> of your telnetd binary. Not 100% sure there's a build issue there, but
> could be.
>
> Steve
>
> --- David Banas <dbanas@xxxxxxxxxxxxxx> wrote:
> > Hi John,
> >
> > Thanks for the reply. I tried your suggestion, but am still getting
> > the same
> > error when I try to telnet to the board.
> >
> > Just for kicks, I tried to run 'telnetd' from the uClinux command
> > prompt
> > (logged in as 'root'). When I did that, I got an extra error message,
> > as so:
> >
> > -------- 'telnetd' command output begins here. ------------
> > telnetd: getpeername: Socket operation on non-socket
> > telnetd: All network ports in use.
> > -------- 'telnetd' command output ends here. ------------
> >
> > Thanks,
> >
> > David Banas
> > Field Applications Engineer
> > Nu Horizons Electronics Corp.
> > 2070 Ringwood Avenue
> > San Jose, CA 95131
> > (408)434-0800 - office
> > (415)846-5837 - cell
> > http://www.nuhorizons.com
> >
> > > -----Original Message-----
> > > From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
> > [mailto:owner-microblaze-
> > > uclinux@xxxxxxxxxxxxxx] On Behalf Of John Williams
> > > Sent: Thursday, May 05, 2005 6:59 PM
> > > To: microblaze-uclinux@xxxxxxxxxxxxxx
> > > Subject: Re: [microblaze-uclinux] telnetd: All network ports in
> > use.
> > >
> > > Hi David,
> > >
> > > David Banas wrote:
> > > > Does anyone know why I'm getting this error when I try to telnet
> > to my
> > > > board?
> > > > (ping and thttpd are working fine.)
> > >
> > > Go to menuconfig-> vendor/user settings -> network applications ->
> > > telnetd and select the '[*] telnetd does not use openpty()' option.
> > >
> > > Details of the cause can be found in the uclinux-dev ML archives
> > >
> > > Regards,
> > >
> > > John
> > >
> > >
> > > ___________________________
> > > microblaze-uclinux mailing list
> > > microblaze-uclinux@xxxxxxxxxxxxxx
> > > Project Home Page :
> > http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> > > Mailing List Archive :
> > http://www.itee.uq.edu.au/~listarch/microblaze-
> > > uclinux/
> > >
> > >
> > >
> >
> ________________________________________________________________________
> > > This email has been scanned for all viruses by the MessageLabs
> > Email
> > > Security System. For more information on a proactive email security
> > > service working around the clock, around the globe, visit
> > > http://www.messagelabs.com
> > >
> >
> ________________________________________________________________________
> >
> >
> > ___________________________
> > microblaze-uclinux mailing list
> > microblaze-uclinux@xxxxxxxxxxxxxx
> > Project Home Page :
> > http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> > Mailing List Archive :
> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> >
> >
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-
> uclinux/
>
>
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs Email
> Security System. For more information on a proactive email security
> service working around the clock, around the globe, visit
> http://www.messagelabs.com
> ________________________________________________________________________
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/