Re: [microblaze-uclinux] XUPV2P Board with 512MB DIMM

[Krzysztof Kościuszkiewicz <kokr@xxxxxxxxxxxxxxxxxx>]

reichardt@xxxxxxxxxxxxxxxxxxxx wrote:
> [...]
> So my questions:
> - Did anyone use the XUPV2P with 512MB DDR

I am using it with 128MB

> - Do you use ISE7.1 or ISE8.x

ISE 8.2 on Debian linux

> - If you use the 512MB DDR, did you have to recompile the image.bin because the 
> opb_ddr IP names and so the information in the xparameters.h are different? 

I guess you ask about the binary image distributed with XUPV2P. AFAIR 
uClinux cares only about the base address and size of memory, and these 
are build-time constants. So if you won't change the base address of 
opb_ddr and use same or larger memory you might be able to  boot the 
default image and linux will just see 256MB of the ram. But you'll 
probably want to customize filesystem to include your own apps and then 
you will probably rebuild image.bin anyway.

Regards,
--
Krzysztof Kościuszkiewicz,
Gadu: 111851, Jabber: kokr@xxxxxxxxxxxx
"Simplicity is the ultimate sophistication"
                       -- Leonardo da Vinci
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/