Re: [microblaze-uclinux] XUPV2P with 512MB DIMM

[Igor Sachs <sachs@xxxxxxx>]

Hi John,

thank you for your reply which solved the problem.
I had only issued "make clean" instead of 
"make clean oldconfig dep"

Regards,

Igor



Hi Igor,

Igor Sachs wrote:

> I am using the XUPV2P with 512MB DIMM, but uClinux only recognizes
> 256 MB RAM. 
> After including the mch_opb_ddr for DDR_512MB within EDK 8.2, I was able
> to successfully pass the Memory Test for 512MB.
> 
> I ensured under "Software Platform Settings" -> "OS and Libraries"
> that the Memory is used for uClinux v1.00.d:
> main_memory=DDR_512MB_64MX64_rank2_row13_col10_cl2_5
> but keeping the default values for:
> main_memory_start=-1
> main_memory_size=0
> 
> The generated auto-config.in shows the correct Memory configuration:
> 
> # MAIN_MEMORY Settings
> define_hex CONFIG_XILINX_ERAM_START 0x20000000
> define_hex CONFIG_XILINX_ERAM_SIZE 0x20000000
> 
> Building the uClinux Kernel image and downloading it to the FPGA:

After copying the auto-config.in file across, did you do a "make clean 
oldconfig dep" to ensure these new settings were picked up?

There's no other configuration file you need to change - it just sounds 
like the updated auto-config.in hasn't propagated yet.

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/