[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] Compiling uClinux on MicroBlaze
Hi Ashish,
It looks like your timer interrupt is not setup correctly.
BEGIN opb_intc
PARAMETER INSTANCE = opb_intc_0
PARAMETER HW_VER = 1.00.c
PARAMETER C_BASEADDR = 0x41200000
PARAMETER C_HIGHADDR = 0x4120ffff
BUS_INTERFACE SOPB = mb_opb
PORT Irq = Interrupt
//Try adding your timer below
PORT Intr = RS232_Uart_1_Interrupt & SysACE_CompactFlash_SysACE_IRQ & LEDs_4Bit_IP2INTC_Irpt
END
Hopefully that is the source of your problem.
- Jose
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jose A. Torres
Treasurer
Multi Disciplinary Robotics Club
Multi Agent Bio-Robotics Lab (09-1100)
Kate Gleason College of Engineering
Rochester Institute of Technology
http://mdrc.rit.edu
http://gameboysandrobots.com
Email: jat5737@xxxxxxx
Cellphone:(585) 230-5709
Lab phone:(585) 475-7208
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~