RE: [microblaze-uclinux] u-boot 1.2.0 petalogix patch.

["Michal Simek" <monstr@xxxxxxxxx>]

I don't have Spartan-3e to test too.

You can send me your board and I will test it. :-)
Or you can test it.

Michal Simek


> What about Spartan-3e support? I don't have ml401 to test...
>
> -----Original Message-----
> From: owner-microblaze-uclinux@xxxxxxxxxxxxxx 
> [mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of mONStR
> Sent: Sunday, March 25, 2007 10:37 PM
> To: microblaze-uclinux@xxxxxxxxxxxxxx
> Subject: [microblaze-uclinux] RE: [microblaze-uclinux] u-boot 1.2.0 
> petalogix patch.
>
> Hi Leonid and John,
> I am U-BOOT custodian for Microblaze and a got some changes to u-boot 
> branch. This changes are only available in u-boot-microblaze.git.
>
> http://www.denx.de/cgi-bin/gitweb.cgi
> http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=forks
> git clone git://www.denx.de/git/u-boot-microblaze.git u-boot
>
> I look at your U-BOOT port and we have dissimilarity between 1.2.0 and 
> your 1.1.4.
>
> Support for:
> - ml401 and xupv2p board.
> - BSP automatic config, because your auto-config.h is very big and for 
> U-BOOT tree is inconvenient.
> - reset.
> - interrupt controller
> - timer support
>
> Now I am working on fsl support command frd, frdb, fwr and fwrb fro 
> blocking and non-blocking read and write from FSL.
> And then I plan to do on sysace support.
>
> Best regards,
> Michal Simek
>
>
>
>
> ------------ Původní zpráva ------------
> Od: Leonid <Leonid@xxxxxxxxx>
> Předmět: RE: [microblaze-uclinux] u-boot 1.2.0 petalogix patch.
> Datum: 26.3.2007 03:59:33
> ----------------------------------------
> Well, I thought you have "official" patch, but that will suffice most
> likely, thanks.
>
> My ultimate goal is to port Petalogix's changes into 1.2.0 and I hope
> 1.1.4 patch will help since u-boot structure didn't change that much.
>
> You see, we have several different architectures (PPC - both "real" and
> Xilinx's - as well as Microblaze and ARM9) in parallel development and I
> would like to use same u-boot tree for all of them if I can and 1.2.0 is
> latest and greatest.
>
> Thanks again,
>
> Leonid.
>
> -----Original Message-----
> From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
> [mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of John
> Williams
> Sent: Sunday, March 25, 2007 3:38 PM
> To: microblaze-uclinux@xxxxxxxxxxxxxx
> Subject: Re: [microblaze-uclinux] u-boot 1.2.0 petalogix patch.
>
>
> Leonid wrote:
> > So, what about 1.1.4 patch at least? That you must have I suppose.
>
> I generated the attached out of our revision control tree - it should be
>
> more or less the same as what you would get if you did a diff -Naur
> between the u-boot subdir in PetaLinux, and a vanilla u-boot 1.1.4 tree.
>
>  Is that what you are after?
>
> Regards,
>
> John
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.17/730 - Release Date: 22.3.2007 
> 7:44

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/