RE: [microblaze-uclinux] RE: [microblaze-uclinux] u-boot 1.2.0 petalogix patch.

["Leonid" <Leonid@xxxxxxxxx>]

I understand of course... this is the reason I want to try to port it
for 1.2.0 u-boot.

-----Original Message-----
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of John
Williams
Sent: Monday, March 26, 2007 3:46 PM
To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] RE: [microblaze-uclinux] u-boot 1.2.0
petalogix patch.

Leonid wrote:
> What about Spartan-3e support? I don't have ml401 to test...

That's the whole point of what we did to u-boot with auto-config - it 
just works on any board - there is just a generic microblaze-auto BSP, 
and it uses autoconfig to get the necessary parameters.

You don't have to use it if you don't want to, but understand there is a

reason we did it that way...

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/