RE: [microblaze-uclinux] RE: ### uClinux 2.6

["Steve Spano" <steve@xxxxxxxxxxxxx>]

Hi

Thanks! I was working right off of the xilinx posts, looks like you boosted
it to 2.6.19. 

Is there a working autoconf.h file anywhere, supporting ROMFS?

Do you know if the Ethernet driver is the same from the 2.4? Our
free-mac-core is now working in 2.4; so we will be releasing a driver on our
website soon.

Thanks

Steve Spano
FLE

-----Original Message-----
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of John Williams
Sent: Wednesday, April 04, 2007 9:00 PM
To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] RE: ### uClinux 2.6

Hi Steve,

The baseline set of patches released so far will mount an embedded ROMFs 
image in the same way it is done for 2.4.

http://developer.petalogix.com/wiki/MicroBlaze-2.6-Kernel

Regards,

John

Steve Spano wrote:
> Hi,
> 
> Were there some special patches cooked up to get uClinux 2.6 to boot a
> ROMFS?
> 
> I would like to use the same ROMFS that I have a uClinux 2.4 running, but
> load that up on a 2.6.
> 
> On other notes - FLE should be releasing the 2.4.x driver for our free
> Ethernet MAC; later this month.
> 
> Thanks
> 
> Steve Spano
> FLE
> 
> 
> 
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/




___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/