Re: [microblaze-uclinux] EXT2 error / read only file system

[John Williams <jwilliams@xxxxxxxxxxxxxx>]

Hi Bruno,

Bruno Herrera wrote:
[snip]

> uclinux[mtd]: root filesystem index=0
> *******
> VFS: test name = </dev/root>
> VFS: fs_name = <ext2>
> VFS: fs_name = <romfs>
> VFS: root name <1f:00>
> *******
> VFS: tried fs_name = <ext2> err= -22
> VFS: tried fs_name = <romfs> err= 0

At boot, the kernel attempts to mount the root device with all known 
filesystems.  You have compiled ext2 and romfs support into your kernel, 
so both filesystems "get a go" at mounting the root device.  Since your 
root dev points to a memory-based romfs filesystem, ext2 fails, but 
romfs succeeeds.  This is not an error, it's just how it's designed.

> VFS: Mounted root (romfs filesystem) readonly.
> Freeing init memory: 36K
> init started:  BusyBox v1.00 (2006.12.05-04:15+0000) multi-call binary
> Could not run '/etc/rc.sysinit': Permission denied

On your development machine, have a look in petalinux-dist/romfs/etc - 
what are the permissions on the rc.sysinit file?

Are you using a standard petalinux install, or uClinux-dist?

Regards,
John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/