[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[microblaze-uclinux] petalinux and DHCP

To: <microblaze-uclinux@xxxxxxxxxxxxxx>
Subject: [microblaze-uclinux] petalinux and DHCP
From: "Sebastien Baldacchino" <sebastien.baldacchino@xxxxxxxxxx>
Date: Fri, 18 May 2007 17:02:32 +0100
In-reply-to: <464D0A41.3060907@xxxxxxxxxxxxxx>
References: <464CFAE7.3090102@xxxxxxxxxxxx> <464D0A41.3060907@xxxxxxxxxxxxxx>
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx
Thread-index: AceY+y2wHz+vAvrrTaSfxRW6eu948gAaWJDg
Thread-topic: petalinux and DHCP

Hi,

I have put petalinux on my board and I would like to obtain an IP Adress
automatically.

That is the reason that in the option of the kernel, inside the menu
"network Addresses, I have enable "Obtain IP address automatically"

But when I boot petalinux and try to connect the board to the network, I
have this message:
"1 00:01:07 dhcpcd[33]: timed out waiting for a valid DHCP server
response"

Have you any idea to solve this problem?

Cheers,
Sebastien




___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- Re: [microblaze-uclinux] petalinux and DHCP
  - From: John Williams

References:
- [microblaze-uclinux] uCLinux cannot allocate EMAClite interrupt
  - From: Jean-Yves Ouellet
- Re: [microblaze-uclinux] uCLinux cannot allocate EMAClite interrupt
  - From: John Williams

Prev by Date: RE: [microblaze-uclinux] PetaLinux and ML501 - issue
Next by Date: [microblaze-uclinux] Non-PCI AHCI SATA driver in uclinux
Previous by thread: Re: [microblaze-uclinux] uCLinux cannot allocate EMAClite interrupt
Next by thread: Re: [microblaze-uclinux] petalinux and DHCP
Index(es):
- Date
- Thread