Re: [microblaze-uclinux] Spartan 3E500 kits, REV C and REV D

[Jens Ravn Alsig <alsig@xxxxxxxx>]

Hi,

What do you mean be "boot anything"?

I also have a rev d kit and had some problems with downloading via jtag. The
download seemed ok but when I tried to execute the program failed. 

I fixed the problem by justing the configuration jumpers. 
They should be (M2:M1:M0) = 0:1:0

/Jens



On Tue Jun 19 23:30 , 'e.stiebler' <emu@xxxxxxxxxx> sent:

>Hi all,
>as it seems I'm the first one who has one of the REV D kits here ...
>
>The REV D has 64 MBytes of SDRAM instead of the 32 MBytes on the REV C.
>
>Hopefully that the reason, I can't boot anything but the first stage on 
>my board. I already found some occurrences of the SDRAM 16Mx16 IP, and 
>changed it to SDRAM_32Mx16 already, but it seems I didn't catch all of 
>them. BTW, it seems that it is the same DDR SDRAM as on the 
>Spartan3e1600 board.
>
>Cheers
>___________________________
>microblaze-uclinux mailing list
>microblaze-uclinux@xxxxxxxxxxxxxx
>Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>)



___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/