[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] Error: Could not read PHY control register
Hi Ryan,
Ryan Marotz wrote:
I've found the problem I was having. I was using the Xilinx Base System
Builder tool to create the project. I used the Avnet supplied XBD files
for the development board I was using. Those files did not have all the
ports connected to the PHY. Specifically it was missing the PHY_tx_er
port and PHY_rst_n port. After I connected those, uClinux could use the
PHY.
Glad you got it sorted.
Regards,
John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/