Re: [microblaze-uclinux] Spartan3E-500, rev D board

["Stephane Rousseau" <stephaner@xxxxxxxxx>]

I have a RevD board and I'm successful on kernel 2.4 but haven't had
the the to try kernel 2.6. But i don't use the flash and have the J30
to M0:OFF,M1:0N,M2:OFF in order to get the ram working.

Stephane

On 7/10/07, emu@xxxxxxxxxx <emu@xxxxxxxxxx> wrote:
> John Williams wrote:
> > Hi folks,
> >
> > Would one of you who has succesfully got PetaLinux going on the RevD
> > board please be so kind as to post your EDK project, and
> > auto-config.in/Kconfig.auto?
> >
> > Without a board here to test I'm reluctant to add official support,
> > however this rev C / D issue is causing people some pain, so your
> > assistance would be greatly appreciated.
>
> Not there yet :(
> But a question: what SDRAM chip is on the 3e-500-rev-c ?
> I got in the meantime also a 3e-1600-rev-a which has a m46v32m16
> and a 3e-500-rev-d which also has the m46v32m16.
> So, just to be safe, the 3e-500-rev-c had a m46v16m16 ?
>
> Cheers
>
> P.S. The problem is somehow in the bitfile. At least here. If I use the
> bitfile from the prebuilt directory, I can use u-boot and uclinux.
> But never succeeded in making a working bitfile for the
> spartan-3e500-rev-d board. Only the first stage boot comes up :(
>
>
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/