RE: [microblaze-uclinux] ISE 9.1.3 and EDK 9.1.2

["Fletcher, Bryan" <Bryan.Fletcher@xxxxxxxxx>]

I haven't run uClinux on this platform, but I do know that EDK 9.1.2
introduced a problem with DDR memory implementation.  See Xilinx Answer
Record 25390 for the solution.

http://www.xilinx.com/xlnx/xil_ans_display.jsp?iCountryID=1&iLanguageID=
1&getPagePath=25390&BV_SessionID=@@@@0868333522.1184698477@@@@&BV_Engine
ID=ccceaddlgidjjhecefeceihdffhdfkf.0

Bryan


-----Original Message-----
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of e.stiebler
Sent: Tuesday, July 17, 2007 12:01 PM
To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: [microblaze-uclinux] ISE 9.1.3 and EDK 9.1.2

Hi all,
anybody using this combination above successfully ?
I'm not having any problems to compile and run the petalinux-rc3 on the 
"old" ISE-8.2.3 and EDK-8.2.2.
But never succeded in having a working hardware on the 9.1 version.

Any comments ?
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/