[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: AW: [microblaze-uclinux] bug httpd petalinux_v010-rc1

To: <microblaze-uclinux@xxxxxxxxxxxxxx>
Subject: AW: AW: [microblaze-uclinux] bug httpd petalinux_v010-rc1
From: "Raul Camaras" <raul.camaras@xxxxxxxxxxxxxxxxxxx>
Date: Wed, 1 Aug 2007 12:05:00 +0200
Importance: Normal
In-reply-to: <000101c7d358$989605e0$140aa8c0@raul>
Organization: Nokian Capacitors GmbH
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx

Hello,

my error seems to have to do with flash. I have no flash partition in my
system, can it be possible?
Or is it somehow compulsory in 2.6?
My error message:

make ARCH=microblaze -C vendors romfs.post
make[1]: Wechsel in das Verzeichnis Verzeichnis
»/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors«
make -C
/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors/PetaLogix/micr
oblaze-auto/.
dir_v=/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors/PetaLogi
x/microblaze-auto/. -f
/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors/vendors-common
.mak romfs.post
make[2]: Wechsel in das Verzeichnis Verzeichnis
»/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors/PetaLogix/mic
roblaze-auto«
make[2]: Für das Target »romfs.post« gibt es nichts zu tun.
make[2]: Verlassen des Verzeichnisses Verzeichnis
»/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors/PetaLogix/mic
roblaze-auto«
make[1]: Verlassen des Verzeichnisses Verzeichnis
»/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors«
find /home/petalinux-v0.20-rc3/software/petalinux-dist/romfs/. -name CVS
| xargs -r rm -rf
u-boot/petalinux-uboot-config
u-boot/petalinux-uboot-config: line 177: + : syntax error: operand
expected (error token is " ")
make: *** [u-boot-config] Fehler 1

Please, any idea?
Thanks.
Raul Camaras

-----Ursprüngliche Nachricht-----
Von: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] Im Auftrag von Raul
Camaras
Gesendet: Dienstag, 31. Juli 2007 11:53
An: microblaze-uclinux@xxxxxxxxxxxxxx
Betreff: AW: AW: [microblaze-uclinux] bug httpd petalinux_v010-rc1

Oh, sorry, I forgot to apply that hack for non-english distros...
Now my error message is the next:

make[2]: Für das Target »romfs.post« gibt es nichts zu tun.
make[2]: Verlassen des Verzeichnisses Verzeichnis
»/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors/PetaLogix/mic
roblaze-auto«
make[1]: Verlassen des Verzeichnisses Verzeichnis
»/home/petalinux-v0.20-rc3/software/petalinux-dist/vendors«
find /home/petalinux-v0.20-rc3/software/petalinux-dist/romfs/. -name CVS
| xargs -r rm -rf
u-boot/petalinux-uboot-config
u-boot/petalinux-uboot-config: line 177: + : syntax error: operand
expected (error token is " ")
make: *** [u-boot-config] Fehler 1

???

Thanks.
Raul Camaras

-----Ursprüngliche Nachricht-----
Von: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] Im Auftrag von John
Williams
Gesendet: Dienstag, 31. Juli 2007 04:33
An: microblaze-uclinux@xxxxxxxxxxxxxx
Betreff: Re: AW: [microblaze-uclinux] bug httpd petalinux_v010-rc1

Hi Raul,

You are trying to build a 2.6 kernel for a microblaze v3.00 system,
correct?

You really, really should moev to a modern MicroBlaze!

However, to proceed, simply copy 
linux-2.6.x/arch/microblaze/kernel/cpu/mb4.c to mb3.c

That should get you going.

Regards,

John

Raul Camaras wrote:
> Hi,
> 
>  
> 
> I do it right with file Kconfig.auto. When compiling the kernel 2.6
with 
> ?make all? I get next error:
> 
>  
> 
>   CC      arch/microblaze/kernel/exceptions.o
> 
> In file included from arch/microblaze/kernel/exceptions.c:13:
> 
> include/asm/exceptions.h:43:5: warning: 
> "CONFIG_XILINX_MICROBLAZE0_FPU_EXCEPTION" is not defined
> 
> make[3]: *** Keine Regel vorhanden, um das Target 
> »arch/microblaze/kernel/cpu/mb3.o«,
> 
>   benötigt von »arch/microblaze/kernel/cpu/built-in.o«, zu erstellen.

> Schluss.
> 
> make[2]: *** [arch/microblaze/kernel/cpu] Fehler 2
> 
> make[1]: *** [arch/microblaze/kernel] Fehler 2
> 
> make[1]: Verlassen des Verzeichnisses Verzeichnis 
> »/root/petalinux-v0.20-rc3/software/linux-2.6.x-petalogix«
> 
> make: *** [linux] Fehler 1
> 
>  
> 
> What is to do?
> 
>  
> 
> Thanks.
> 
> Raul Camaras
> 
>  
> 
> -----Ursprüngliche Nachricht-----
> *Von:* owner-microblaze-uclinux@xxxxxxxxxxxxxx 
> [mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] *Im Auftrag von *Yeoh

> Chun Yeow
> *Gesendet:* Donnerstag, 26. Juli 2007 03:10
> *An:* microblaze-uclinux@xxxxxxxxxxxxxx
> *Betreff:* Re: [microblaze-uclinux] bug httpd petalinux_v010-rc1
> 
>  
> 
> Hi, Raul
> 
> Kernel version 2.6 uses Kconfig.auto, not auto-config.in 
> <http://auto-config.in>. For microblaze-auto, it is put in 
> ./linux-2.6.x/arch/microblaze/platform/microblaze-auto
> 
> If you do split development, regarding Kconfig.auto, you can refer:
>
www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2007/07/msg00017
.html 
>
<http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2007/07/
msg00017.html>
> 
> Hope this help.
> 
> regards,
> chun yeow
> 
> On 7/25/07, *Raul Camaras* <raul.camaras@xxxxxxxxxxxxxxxxxxx 
> <mailto:raul.camaras@xxxxxxxxxxxxxxxxxxx>> wrote:
> 
> Hello John,
> 
> I would like to use fnord too.
> I downloaded petalinux-v0.20-rc3.tar.gz from the petalogix site.
> When I run "make user_only" I get next error:
> 
>
/home/petalinux-v0.20-rc3/tools/linux-i386/microblaze-uclinux-tools/bin/
>
../lib/gcc/microblaze-uclinux/3.4.1/../../../../microblaze-uclinux/bin/l
> d.real: unrecognized option `--fatal-warnings'
>
/home/petalinux-v0.20-rc3/tools/linux-i386/microblaze-uclinux-tools/bin/
>
../lib/gcc/microblaze-uclinux/3.4.1/../../../../microblaze-uclinux/bin/l
> d.real: use the --help option for usage information
> collect2: ld returned 1 exit status
> make[2]: *** [busybox] Fehler 1
> make[2]: Verlassen des Verzeichnisses Verzeichnis
> »/home/petalinux-v0.20-rc3/software/petalinux-dist/user/busybox«
> make[1]: *** [all] Fehler 2
> make[1]: Verlassen des Verzeichnisses Verzeichnis
> »/home/petalinux-v0.20-rc3/software/petalinux-dist/user«
> make: *** [user_only] Fehler 2
> 
> What could I do?
> 
> By the way, using kernel version 2.6, where should I put my file
> auto-config.in <http://auto-config.in>?
> Should I choose vendot: Petalinux and target: microblaze-auto?
> Thanks a lot.
> 
> Raul Camaras
> 
>  
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- AW: AW: [microblaze-uclinux] bug httpd petalinux_v010-rc1
  - From: Raul Camaras

Prev by Date: [microblaze-uclinux] Query on u-boot for Spartan3E500-RevC on EDK 9.1
Next by Date: RE: [microblaze-uclinux] xilinx_gpio driver patch
Previous by thread: [microblaze-uclinux] Query on u-boot for Spartan3E500-RevC on EDK 9.1
Next by thread: AW: AW: [microblaze-uclinux] bug httpd petalinux_v010-rc1
Index(es):
- Date
- Thread