Re: [microblaze-uclinux] ISE 9.1.3 and EDK 9.1.2

["Otto Blomqvist" <o2blom@xxxxxxxxx>]

Hi John,

Did Xilinx come through on the Spartan 3E Rev D loaner board ? Otherwise I 
can send you mine.
In case they did, do you know approximately when it will be supported ?

Thanks !

/Otto Blomqvist



----- Original Message ----- 
From: "John Williams" <jwilliams@xxxxxxxxxxxxxx>
To: <microblaze-uclinux@xxxxxxxxxxxxxx>
Sent: Tuesday, July 17, 2007 3:40 PM
Subject: Re: [microblaze-uclinux] ISE 9.1.3 and EDK 9.1.2


> Hi Emmanuel,
>
> e.stiebler wrote:
>
> > Actually, what I meant was, that we have two boards with more than 
> > 32Mbytes of SDRAM (newer Sprtan3e1600 and spartan3e500-RevD). To access 
> > all of them, we have to change and move the address-maps for those two.
> > I was proposing the same address map as the ML401 board (DDR from 
> > 0x10000000 to 0x1fffffff, but nobody listens ;-).
>
> I've just asked Xilinx to lend us a Rev D s3e-500 board so we can add 
> support for it to PetaLinux - in the process we'll sync up the memory maps 
> across these three boards for you :)
>
> Cheers,
>
> John
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/