Re: [microblaze-uclinux] FS-BOOT keeps silent on 3E500 rev D

["Nicho Johns" <nicho.johns@xxxxxxxxx>]

As far as I can find in the archives, I always see people having no problem with FS-boot.

 

When I upload the prebuilt bitfile from the Xilinx Microblaze / LCD ref design, the device runs and I can see messages on the serial port.

With  the same configuration and whatever the Mode jumpers position, when I upload the prebuilt Spartan 3E500 Rev C bitfile, nothing happends.

 

Other jumpers are in default config.

 

I'm stucked !

 

Thanks for your help

Nicho

 

2007/9/7, e.stiebler <emu@xxxxxxxxxx>:

Nicho Johns wrote:
> I cannot have FS-BOOT running on my Spartan 3E500 Rev D even when using
> pre-built reference design.
> The board is OK as well as the serial connection when using Xilinx
> reference designs.
Check the archive, there should be a lot of discussion already about the
rev-d version.
But seeing that you can't even start the reference designs, I would
guess, that your mode jumpers are wrong.

> Any idea ?

what did you try already ?
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/