There are 2 images : (1) image.bin and (2) image.ubOne for raw boot, the other for u-boot.It's worth trying the other one.Duy-Ky
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx [mailto: owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of Nicho Johns
Sent: Sunday, September 09, 2007 12:00 PM
To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: [microblaze-uclinux] Unable to allocate RAM for process text/data
Hi all,I'v the following kernel panic while running the OS from RAMI'm on RevD 3E500 SK and just moved memory from 0x22000000 to 0x24000000 without changing its size.Should I try to reduce the OS size ?Thanks,Nicho## Starting application at 0x24000000 ..
Found romfs @ 0x2420708c (0x00230000)
#### klimit 2421f000 ####
Moving 0x00230000 bytes from 0x2420708c to 0x2421e994
New klimit: 0x2444f000
Linux version 2.6.20-uc0 ( nichojohns@localhost.localdomain) (gcc version 3.4.1 ( PetaLi
nux 0.20 Build -rc1 050607 )) #4 Sun Sep 9 16:13:55 CEST 2007
setup_cpuinfo: initialising
setup_cpuinfo: No PVR support in CPU. Using static compile-time info
set_cpuinfo_static: Using static CPU info.
setup_memory: max_mapnr: 0x2
setup_memory: min_low_pfn: 0x24000
setup_memory: max_low_pfn: 0x2000
On node 0 totalpages: 8192
DMA zone: 64 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8128 pages, LIFO batch:0
Normal zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 8128
Kernel command line:
OPB INTC #0 at 0x41200000
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 28068k/32768k av
Calibrating delay loop... 24.72 BogoMIPS (lpj=123648)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)info.m default boot location. Image w
xgpio0 #0 at 0x40000000 mapped to 0x40000000 device: 10,185 not using IRQ
setup_memory: max_mapnr: 0x25fff
xgpio1 #1 at 0x40020000 mapped to 0x40020000 device: 10,186 not using IRQ
24000010: 0000000
setup_memory:
uartlite.0 : ttyS0 at MMIO 0x40600000 (irq = 2) is a uartlite
On node 0 totalpages: 8192ne
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize for memmap5 78204175 746f7363
eth0: using fifo mode.========eth0: No PHY detected. Assuming a PHY at address 0..ov
eth0: Xilinx EMACLite #0 at 0x40E00000 mapped to 0x40E00000, irq=1(c) 2006 Peta
physmap platform flash device: 01000000 at 21000000memmap
PID ha
erase region 0: offset=0x0,size=0x20000,blocks=128
RedBoot partition parsing not available
Dentry
uclinux[mtd]: RAM probe address=0x2421e994 size=0x230000
Creating 1 MTD partitions on "RAM":
Directional Button & Rotary Encoder Driver
(c) 2007 PetaLogix
TCP cubic registered
NET: Registered protocol family 1
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 84k freed
Unable to allocate RAM for process text/data, errno 12
Unable to allocate RAM for process text/data, errno 12
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
<0>Rebooting in 120 seconds..Machine restart...Stack:
25ffbf20 00000000 00000000 00017a80 25ffa000 2401765c 241a6164 0000000b
0000000b 00000000 ffffcbd0 00000bd0 24008868 24115718 800000a4 800000a4
800000a4 00000000 00000001 24000390 241a6eb8 00000078 24209520 00000000
Call Trace:
[<2401765c>] emergency_restart+0xc/0x20
[<24008868>] panic+0x11c/0x14c
[<24115718>] i8042_panic_blink+0x58/0x108
[<24000390>] init+0x2c4/0x34c
[<240011ac>] kernel_thread_helper+0x10/0x24
[<2400119c>] kernel_thread_helper+0x0/0x24