[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] sysv ipc support on microblaze

Hi Jim,

Jim Van Vorst wrote:

John,
Still no-go.  I applied the patch and get the same error:
   if ((msqid = msgget(key, 0644 | IPC_CREAT)) == -1) {
       perror("msgget");
       exit(1);
   }

results in
msgget: Function not implemented
I verified the files are patched and rebuilt. (syscall_table.S and sys_microblaze.c).
Your code fragment builds and runs OK here - can you confirm you've enabled IPC in the kernel config menu 

General Setup -> System V IPC

?


Is this the full patch?


Yep, that's it.
If you want to trace it, try putting a printk in sys_ipc() - arch/microblaze/kernel/sys_microblaze.c 

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/