Re: [microblaze-uclinux] Problems with tftpserver configuration

[Xin Xie <xxie@xxxxxxxxxxxxxx>]

Hi, 

Can you first check the /tftp directory's property and make sure it is
readable. Also have a look of /var/log/syslog, it should give you more
error message of tftp. 

Cheers
Xin 

On Fri, 2007-10-19 at 09:54 +0800, stam wrote:
> Hi John and All
> 
> I am new user with embedded system and uClinx.
> 
> I am trying to follow the step of reference design of xilinx Spartan3E500 rev.D board under petalinux.
> 
> When I goes to the step :  cat /tftpboot/u-boot.srec > /dev/ttyS0
> 
> the kermit screen stop at the line :
> 
> FS-BOOT: Press 'n' to boot old image.
> FS-BOOT: Use new image.
> FS-BOOT: Booting image...
> 
> after that there is no response.
> 
> I check the mailinglist, and there is no solution available now.
> 
> I doubt that the tftp server may not working properly.
> 
> The file is list as follows:
> 
> 
> service tftp
> {
> 	socket_type	= dgram
> 	protocol	= udp
> 	port		= 69
> 	wait		= yes
> 	user		= nobody
> 	server		= /usr/sbin/in.tftpd
> 	server_args	= -c -s /tftpboot
> 	disable		= no
> 	per_source	= 11
> 	cps		= 100 2
> }
> 
> under the console , when I test tftp with
> 
> #tftp  localhost
> tftp>  get image.bin
> 
> transfer time out.
> tftp>
> 
> 
> When I change file /etc/xinetd.d/tftp  with the "user	= root",  the server work and get/put commands under tftp performed.
> 
> So how can I make it?
> 
> Sorry for my English.  ;-)
> 
> Bow!
> 
> 
>  				
> --------------
> stam
> 2007-10-19
> 
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/