Re: [microblaze-uclinux] Petalinux on Spartan3E 500 Rev.D

[John Williams <jwilliams@xxxxxxxxxxxxxx>]

Hi Vicent,

Vincent Claes wrote:

>  
> I am new to petalinux so I had a try with the "demo" for the SPARTAN3E
> board. I used Cygwin under Windows XP and ISE 8.2i and EDK8.2i.
> The commands where building the files under cygwin but when I try to
> make connection under hyperterminal I don't get list of
> bootmessages... so I can't login.
>  
> I tried the persistent one and the onetime version of the demo. Anyone
> has some help for me?
>  

Make sure your serial cable is connected to the DTE socket (the one
nearest the corner of the board), and your PC is listenning on the COM
port at 115200 baud, 8 data bits, no parity

Confirm that the FPGA's 'done' light goes on after bitstream download.

Regards,

John

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/