RE:[microblaze-uclinux] problems with download image.bin for kernel 2.6

Hi,

I have the same problem when booting the uCLinux image.

I have seen no answer for your problem, but I have seen that you have continued posting, so I suppose you have fixed it.

Could you tell me which is the problem?

Thanks.

Original message:

To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: [microblaze-uclinux] problems with download image.bin for kernel 2.6
From: "moises j. cabrera" <mojuca1808@xxxxxxxxxxxx>
Date: Mon, 26 Nov 2007 11:42:25 -0600 (CST)
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com.mx; h=X-YMail-OSG:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=xM1Lumd6D/u0xRaooDkWMx99sPHDOzduKsZOHqSADi/OzkoAC+xODgEb+0p/CgFAZiByoYr6+2d4jMjvZdeDlkNEScetcTr3WKZi1V32qsyEck+LKYEjEWWPEN3NpmHJ7wkOYretj9dJeOpEn9NeMTzjCwya9ifY7Rwmdrqrg6Y=;
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx

hi,

when i tried to donwload image.bin for kernel 2.6 i run next commands in XMD:

rst

dow -data image.bin 0x44000000

con 0x44000000

but appers next message in terminal window:

found romfs @ 0x4416108c (0x000ee000)

#### klimit 44175000 #####

Moving 0x000ee000 bytes from 0x4416108c to 0x44174d54

New klimit: 0x44263000

and then nothing else happens. What is it happen??, i am using Spartan 3E rev. D, my test Memory works fine, and i change my mode jumpers to M.S. mode and to FPGA mode.

Please help.

thanks