[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] TCP transmit performance

To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] TCP transmit performance
From: "Falk Brettschneider" <falk.brettschneider@xxxxxx>
Date: Wed, 14 May 2008 07:08:50 +0200
In-reply-to: <482A1D6F.2000407@xxxxxxxxx>
References: <20080513211858.135320@xxxxxxx> <482A1D6F.2000407@xxxxxxxxx>
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx

Hi Jim,

Jim Van Vorst wrote:
> Can you compile and run netperf to get Mbits/sec TCP tx throughput?
I had a short look at netperf.org but gave up in a flood of docs. Seems it's  not a 5-minute job to measure with netperf, right? Or can you tell me what to do, maybe it's a simple line to type on command prompt? I need a very short HowTo. :)

CU, F@lk

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- Re: [microblaze-uclinux] TCP transmit performance
  - From: Jim Van Vorst

References:
- Re: [microblaze-uclinux] TCP transmit performance
  - From: Falk Brettschneider
- Re: [microblaze-uclinux] TCP transmit performance
  - From: Jim Van Vorst

Prev by Date: Re: [microblaze-uclinux] TCP transmit performance
Next by Date: RE: [microblaze-uclinux] Microblaze system freeze
Previous by thread: Re: [microblaze-uclinux] TCP transmit performance
Next by thread: Re: [microblaze-uclinux] TCP transmit performance
Index(es):
- Date
- Thread