[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [microblaze-uclinux] TCP transmit performance
Hi Jim,
thanks for your excellent tutorial! :-)
I started netserver-a4.exe on Windows and it's listening on port 12865.
Then I tried the netperf client on microblaze but it seems to have problems and crashes or hangs Linux after about 3 seconds. I also wireshark'ed on Windows but haven't seen any incoming packets from the microblaze system at all. This is what I see on uClinux console... Note it grumbles about those signal catchers (?). Any idea? Does netperf work for you? I've got PetaLinux-v0.3-rc1, you know.
--->8--snip-->8---
Running local start scripts.
Setting hostname:
Setting up network config:
Jan 1 00:00:19 dhcpcd[43]: dhcpConfig: ioctl SIOCADDRT: File exists
eth0 Link encap:Ethernet HWaddr 00:PL:AS:TE:RE:D3
inet addr:172.20.20.18 Bcast:172.20.255.255 Mask:255.255.0.0
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3599 (3.5 KiB) TX bytes:3485 (3.4 KiB)
Interrupt:5
Starting portmap:
Starting thttpd:
init: Booting to single user mode
# /bin/netperf -d -H 172.20.20.99
Program name: /bin/netperf
Local send alignment: 8
Local recv alignment: 8
Remote send alignment: 8
Remote recv alignment: 8
Report local CPU 0
Report remote CPU 0
Verbosity: 1
Debug: 1
Port: 12865
Test name: TCP_STREAM
Test bytes: 0 Test time: 10 Test trans: 0
Host name: 172.20.20.99
installing catcher for all signals
Could not install signal catcher for sig 9, errno 22
Could not install signal catcher for sig 19, errno 22
remotehost is 172.20.20.99 and port 12865
establish_control called with host '172.20.20.99' port '12865' remfam AF_UNSPEC
local '0.0.0.0' port '0' locfam AF_UNSPEC
CU, F@lk
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/