Re: [microblaze-uclinux] lltemac

[trem <tremyfr@xxxxxxxx>]

John Williams a écrit :
> Hi Phillipe,
>
> Reynes Philippe wrote:
>
>   
> > I would be pleased to know what is the state of the ll-temac ?
> > Have you planned to release it soon ? if not, is it possible to get an 
> > alpha version ?
> >     
>
> Attached is a series of patches that should get the ll_temac going on a 
> the most recent petalinux release.  There's plenty of rework required 
> because I had to bring in the most recent xilinx_common core drivers, 
> and that in turn requires changes to the gpio, spi, 
> ethernet/ethernet_lite, and so on.
>
> Also changes to the petalinux BSP generator to handle Kconfig.auto.
>
> Apply in order 01, 02, 03 from toplevel petalinux-dist tree - let me 
> know how it goes.
>
> Regards,
>
> John
>
>
>   
Hi John,

I've tested it with a simple design made with the wizard on a ml505 
(lltemac + SG),
and everything works fine. (just a little problem with the last patch, 
there is a FAILED
on the last Makefile, but nothing really difficult to fix).

Thanks a lot for this driver.

regards,
Philippe


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/