[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[microblaze-uclinux] Re: [microblaze-uclinux] Help with kernel boot, PLEASE
Hi John,
look at
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2008/05/msg00163.html
Michal
> Hi, again.
>
> I've used a new vendor/platform, I have the uclinux running in the same
> target a ML501 with an older version based on ise and edk 8.2, but I need
> approach the advantages of microblaze v7.00 and the PLB. Please thanks for
> your help, and excuse my English.
>
> I don't know about inittab, and that init is selected in the application
> menu.
>
>
> 2008/7/24 Mostafa Ali <extra_brain@xxxxxxxxx>:
>
> > Look there are so many reasons for this problem, Please mention more
> > detalis(like have you used one of the predefined platforms in the
> > vendor/platform menu or you created a new one).
> >
> > One of the reasons is that the kernel doesn't find a start up application.
> > Make sure that inittab is exist in /romfs and init is selected in the
> > application menu in petalinux configuration wizard. I need more de tails fro
> > you, I'll be waiting.
> >
> > --- On *Thu, 7/24/08, John Osorio <kala855@xxxxxxxxx>* wrote:
> >
> > From: John Osorio <kala855@xxxxxxxxx>
> > Subject: [microblaze-uclinux] Help with kernel boot, PLEASE
> > To: microblaze-uclinux@xxxxxxxxxxxxxx
> > Date: Thursday, July 24, 2008, 8:36 AM
> >
> >
> > Hi, folks
> >
> > I have a problem with the kernel boot, I'm using petalinux-v0.30-rc1 and
> > kernel 2.6, my hardware is development under EDK 9.2_02 and ISE 9.2_04. When
> > I'll try boot the image, the boot show in kermit the following:
> >
> >
> > ## Booting image at 8c080000 ...
> > Image Name: PetaLinux Kernel 2.6
> > Image Type: Microblaze Linux Kernel Image (uncompressed)
> > Data Size: 2678812 Bytes = 2.6 MB
> > Load Address: 90000000
> > Entry Point: 90000000
> > Verifying Checksum ... OK
> > OK
> >
> > That's all I don't know, what's the problem, Please I need your Help, Bye.
> > The boot is freeze, Kermit don't show anything
> >
> > --
> > John Osorio
> >
> >
> >
>
>
> --
> John Osorio
>
>
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/