Hi Mak,
try to use u-boot.srec which you got after a
successful make and in windows hyperterminal use "send text file". The kermit
protocol is used for the loadb command in u-boot for downloading the kernel
image. Go to http://developer.petalogix.com/ for
the FS-Bootloader and U-Boot documentation.
Hope this
helps,
Marco
-----Original Message-----
From:
owner-microblaze-uclinux@xxxxxxxxxxxxxx on behalf of
makarand.vispute@xxxxxxxxx
Sent: Mon 9/15/2008 10:20 AM
To:
microblaze-uclinux@xxxxxxxxxxxxxx
Subject: [microblaze-uclinux] Spartan 3E500
board
Hi,
I am trying to port the petalinux kernel 2.6 on my
spartan 3E500 board.
Currently I am trying with the readymade images that are
available in
the petalogix site.
For the project I have installed EDk
on my Windows XP machine.
I have created the project in EDK10.1, which has
all the peripherals.
I am using Windows HyperTerminal as a
console.
When I download my file into the FPGA, I can see some FS boot
loader
messages on the console.
After that it asks for the U-Boot image in
SREC format. I have provided
the image that I got from the Petalogix.
For
downloading the image I m using "Kermit" protocol.
However, I was not yet
managed to download the image.
After few retries it just fails.
I
tried with different Baud setting for the UART, but it is also
not
working.
Am I missing something in the process? Any pointer will be
appreciated.
Thanks
Mak
Please do not print this email
unless it is absolutely necessary.
The information contained in this
electronic message and any attachments to this message are intended for the
exclusive use of the addressee(s) and may contain proprietary, confidential or
privileged information. If you are not the intended recipient, you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately and destroy all copies of this message and any
attachments.
WARNING: Computer viruses can be transmitted via email. The
recipient should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by any virus
transmitted by this
email.
www.wipro.com
Please do not print this email unless it is absolutely necessary.
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com