[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] Petalinx2.6 U-Boot build
Hi,
the problem is that you use ll_temac driver or eth core which is not supported
by current PetaLinux U-BOOT version.
And please do not post disclaimer to mailing list.
Regards,
Michal Simek
> Hello,
>
> I am trying to bring up the Petalinux on my Spartan3E500 baord.
> While compiling the u-boot I am getting the following error.
> /*-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
> net/libnet.a(net.o): In function `ArpRequest':
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c:219:
> undefined reference to `eth_send'
> net/libnet.a(net.o): In function `NetStartAgain':
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x2f4):
> undefined reference to `eth_halt'
> net/libnet.a(net.o): In function `NetSendPacket':
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x3f8):
> undefined reference to `eth_send'
> net/libnet.a(net.o): In function `NetSendUDPPacket':
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x6f4):
> undefined reference to `eth_send'
> net/libnet.a(net.o): In function `PingTimeout':
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x8d0):
> undefined reference to `eth_halt'
> net/libnet.a(net.o): In function `NetReceive':
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0xcd8):
> undefined reference to `eth_send'
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0xd6c):
> undefined reference to `eth_send'
> net/libnet.a(net.o): In function `NetLoop':
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x1214):
> undefined reference to `eth_halt'
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x1220):
> undefined reference to `eth_init'
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x1444):
> undefined reference to `eth_halt'
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x1520):
> undefined reference to `eth_halt'
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x155c):
> undefined reference to `eth_rx'
> /home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/net/net.c(.text+0x1688):
> undefined reference to `eth_halt'
> make[1]: *** [u-boot] Error 1
> make[1]: Leaving directory
> `/home/makarvi/Work/emb_linux/petalinux-v0.30-rc1/software/petalinux-dist/u-boot'
> make: *** [u-boot] Error 2
> /*-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
>
> While configuring I have selected DHCP in the "System Settings".
> I tried with the readymade images those are on the petalogix site those
> works fine on my board.
>
> Can anybody has any idea about this error? Any pointer will be appreciated.
>
> Thanks
> Makarand
>
> * Please do not print this email unless it is absolutely necessary. *
>
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s)
> and may contain proprietary, confidential or privileged information. If
> you are not the intended recipient, you should not disseminate,
> distribute or copy this e-mail. Please notify the sender immediately and
> destroy all copies of this message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient
> should check this email and any attachments for the presence of viruses.
> The company accepts no liability for any damage caused by any virus
> transmitted by this email.
>
> www.wipro.com
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/