|
Hi, We are new in this uClinux. We are trying to configure our linux kernel for microblaze design on Spartan3E500 starter kit. We are following the tutorial to create u-boot image (http://developer.petalogix.com/wiki/BoardGuides/Xilinx/S3E500/Tutorial). During the stage "building the image" we got the following error message: make[2]: Entering directory `/home/cz/Documents/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/tools' gcc -g -Wall -pedantic -idirafter ../include -DTEXT_BASE= -DUSE_HOSTCC -O -c envcrc.c envcrc.c:32:20: error: config.h: No such file or directory make[2]: *** [envcrc.o] Error 1 make[2]: Leaving directory `/home/cz/Documents/petalinux-v0.30-rc1/software/petalinux-dist/u-boot/tools' make[1]: *** [tools] Error 2 make[1]: Leaving directory `/home/cz/Documents/petalinux-v0.30-rc1/software/petalinux-dist/u-boot' make: *** [u-boot] Error 2 So seems like we have some files missing. Does any one have a clue on this problem? BR, Chenxin Connect to the next generation of MSN Messenger Get it now! |