[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] MicroBlaze restarting
Hi Raul,
first of all. Please never start new message from older one. Just start new.
Have you done any tests on your design?
I mean simple EDK memory test. Is it OK?
Have you tried to run U-BOOT?
What is your devel platform?
What linux version are you using?
Any console output is helpful.
Regards,
Michal
>
> Hello all,
>
> this is more a problem of microblaze but of uclinux but here it is.
>
> I have a working design. When I add my opb can core(to the OPB bus), the
> memory (SDRAM) starts to behave strange, sometimes data is not written
> at the first time... and the worst,
> when it jumps to SDRAM baseaddress, where linux image is copied,
> microblaze just restart the initial program(the bootloader itself).
>
> What the hell is doing EDK? I just wanted an OPB peripheral more!
>
> I appreciate any suggestion.
>
> thanks a lot.
>
> Kind regards,
> Raul Camaras
>
>
> AREVA Energietechnik GmbH
> Vorsitzender des Aufsichtsrates: Dr. rer. nat. Peter Kirchesch -
> Geschäftsführung: Dipl. Kfm. Joachim Gessner, Dr. Ing. Wolfgang Voß
> Sitz: Frankfurt am Main - Amtsgericht: Frankfurt am Main, HRB 40819 -
> USt.-ID-Nr. DE 811982897
>
>
> *Giulio Mazzoleni <giulio.mazzoleni@xxxxxxxxxxxxxxxxxxxxxxx>*
> Gesendet von: owner-microblaze-uclinux@xxxxxxxxxxxxxx
>
> 22.10.2008 14:23
> Bitte antworten an
> microblaze-uclinux@xxxxxxxxxxxxxx
>
>
>
> An
> microblaze-uclinux@xxxxxxxxxxxxxx
> Kopie
>
> Thema
> [microblaze-uclinux] Out of tree compilation: autoconf + automake
>
>
>
>
>
>
>
> Greetings,
>
> I'm now facing a quite common problem.
> I need to build an existing application (php-4.4.8) for uClinux on
> Microblaze.
>
> The application uses autoconf to configure and automake to build, so I
> would avoid writing a new Makefile to accomplish this (at least if there
> would be any simpler way).
>
> On blackfin uClinux I took as reference the file
> http://blackfin.uclinux.org/gf/project/uclinux-dist/scmsvn/?action=browse&path=%2Ftags%2F2007R1.1-RC3%2Fuser%2Fblkfin-apps%2Fmplayer%2Fbuild-bfin.sh&view=markup
>
> Now I need to do the same for Petalinux.
> I read the thread "GLib ... uClinux"
> <http://blackfin.uclinux.org/gf/project/uclinux-dist/scmsvn/?action=browse&path=%2Ftags%2F2007R1.1-RC3%2Fuser%2Fblkfin-apps%2Fmplayer%2Fbuild-bfin.sh&view=markup>http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2006/07/msg00011.html
> but that did not help much.
>
> I would be glad if you could give me any advice on how to proceed to
> compile a generic autoconf/automake application.
>
> Many thanks for your time.
> Giulio Mazzoleni
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/