Hi Juan,
what devel board are you using?
> Hi, this is strange..:-0 I'm running my ace file from my compact flash
> and when I execute any of these commands :
Do you use ace file for loading bitstream?
> * Thank you again Michal!*
> U-Boot-mONStR> fatinfo ace 0
> **** ACE CompactFlash not found.
> ** Can't read from device 0 **
>
> ** Unable to use ace 0:1 for fatinfo **
>
> U-Boot-mONStR> fatls ace 0
> **** ACE CompactFlash not found.
> **** ACE CompactFlash not found.
> ** Can't read from device 0 **
>
> Also I try in other device and the result is the same.
>
>
> The traduction of this string " Děkujeme, že jste opět Michal! " that
> is in czech it's
:-)
Czech language is more complicated that you thing. You wrote different thing
that you meant.
You wrote, "Thank you, you are again Michal" not "Thank you again Michal". There
is huge difference. BTW: "Opět díky(děkujeme), Michale"
NO worries about.
BTW: Is here set any communication language? If not, you can communicate with me
fully in Czech. I am native speaker, I'll have no problem with it. :-)
Cheers,
Michal> 2008/10/23 Michal Simek <monstr@xxxxxxxxx <mailto:monstr@xxxxxxxxx>>
>
>
>
>
>
>
> When I execute
>
> fatls ace 0
>
>
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
> Hi,
>
> :-)
>
> SystemACE = just ace
>
> fatls ace 0
> fatls ace 0:1
>
> are the same for first partition
>
> fatls ace 0:2
>
> for second
>
> > *Děkujeme, že jste opět Michal!*
> >
> funny. I think that will be better to use language which is
> understandable for
> others too.
>
> Regards,
> Michal
>
>
> > Hi there.
> >
> > I'm using the u-boot that Michal develops
> > http://monstr.eu/wiki/doku.php?id=uboot:uboot .
> >
> > I've compiled correctly the petalinux kernel (I avoid select the
> > *systemAce* driver from menuconfig )
> >
> > (I followed the guide for build petalinux from scratch and I've made
> > some changes in petalinux-copy-autoconfig, like avoid the verify of
> > system OS and changing the path of the auto-config.h )
> >
> > Right now I've copied the u-boot ace file and the romfs.img in my CF
> > but I don't know how to boot the image.
> >
> >
> > When I execute this command :
> >
> >
> > *U-Boot-mONStR> fatls ide 1
> >
> > *** Invalid boot device ***
> >
> > *This question is for Michal :
> >
> > ¿ What's the correct device of my compact flash? How I can run the
> > linux kernel from my image?
> >
> >
> > --
> > Muchas gracias.
> >
> > Atentamente, Juan Pablo Gómez
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>
>
>
>
> --
> Muchas gracias.
>
> Atentamente, Juan Pablo Gómez
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/