[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] Problems booting petalinux kernel & system_ace

Ok, I'm reading the article of the wiki for solve my doubts

http://monstr.eu/wiki/doku.php?id=fdt:fdt

This is the first thing that I  should have done :-)




2008/10/30 Juan Pablo Gómez <juanwalker@xxxxxxxxx>
Hi Michal, thank you for help me!

 this is what I did :

I run this command as you said :


./tools/mkimage -A microblaze -O linux -T kernel -C none -a 0x92000000 -e 0x921e0000 -n petalinux
 -d  /tftpboot/linux.bin /tftpboot/linux.ub


Image Name:   petalinux
Created:      Thu Oct 30 17:11:34 2008
Image Type:   MicroBlaze Linux Kernel Image (uncompressed)
Data Size:    1953792 Bytes = 1908.00 kB = 1.86 MB
Load Address: 92000000
Entry Point:  921e0000

My u-boot textBase and  CFG_LOAD_ADDR:

#define TEXT_BASE               0x91000000
#define CFG_LOAD_ADDR   0x92000000 /* default load address */

I write that entry point because the size of hte linux.ub is  0x1dd040, then used that entry point


Now, in u-boot I execute :


U-Boot-mONStR> base 0;tftp 91900000 linux.ub;bootm
Base Address: 0x00000000
TFTP from server 192.168.0.12; our IP address is 192.168.0.3
Filename 'linux.ub'.
Load address: 0x91900000
Loading: #################################################################
         #################################################################
         ####
done
Bytes transferred = 1953856 (1dd040 hex)

## Booting kernel from Legacy Image at 91900000 ...
   Image Name:   petalinux
   Image Type:   MicroBlaze Linux Kernel Image (uncompressed)
   Data Size:    1953792 Bytes =  1.9 MB
   Load Address: 92000000
   Entry Point:  921e0000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

And then all freeze.
It could be any problem with the address assignation?

Regards, Juan





2008/10/30 Michal Simek <monstr@xxxxxxxxx>
Hi Juan,

just select build u-boot just for creating image.ub. You don't need to use
u-boot from petalogix dist. And of course you can generate this file with
mkimage tool.

Regards,
Michal

Juan Pablo Gómez wrote:
> Hi Michal, Ok thank you for explain me that. In my kernel configuration
> I not selected Build u-boot because I'm using your u-boot, how I can
> generate this file??
>
> Thank you again Michal!
>
> 2008/10/30 Michal Simek <monstr@xxxxxxxxx <mailto:monstr@xxxxxxxxx>>
>
>     Hi Juan,
>
>     image.ub is supported. U-BOOT doesn't know with bootm command what
>     is elf and
>     with linux kernel can't handle this.
>
>     Some comments below.
>
>     Regards,
>     Michal
>
>
>     > Hi!.
>     >
>     > Ok, let me post this new log, excuse for the last one.
>     >
>     > First of all, let me explain what I do step by step :
>     >
>     > I  build my hardware without any program in my BRAM and then download
>     > the bitsream
>     >
>     > I modify include/configs/xupv2p.h
>     >
>     > I add this line : #define TEXT_BASE               0x92000000
>     >
>     > Then I execute
>     >
>     > *$make mrproper
>     > $make xupv2p_config
>     > $make*
>     > (Log from the compilation <http://pastebin.com/f33b01b15>, many times
>     > this warning this warning was showed in different files like this
>     one :
>     >  include/asm/byteorder.h:31: warning: type qualifiers ignored on
>     > function return type)
>
>     source petalogix setting.sh script
>     export CROSS_COMPILE=microblaze-uclinux-
>
>     >
>     > Then I copy the u-boot file to my project.
>     > *
>     > $cp u-boot $XUP_V2P_PROJECT_DIRECTORY*
>     >
>     > Then I connect my board to the XMD
>     >
>     > *$ xmd -xmp system.xmp -opt etc/xmd_microblaze_0.opt*
>     >
>     > Then execute
>     > *
>     > connect mb mdm ; dow u-boot ; run;*
>     >
>     > (This is the log from XMD <http://pastebin.com/f1b379b61>)
>     >
>     > At moment when I try to load the image.elf file this is ocurrs :
>     image.ub here.
>     >
>     > U-Boot-mONStR> tftp 93000000 image.elf; bootm
>     > TFTP from server 192.168.0.12 <http://192.168.0.12>
>     <http://192.168.0.12>; our IP address is
>     > 192.168.0.3 <http://192.168.0.3> <http://192.168.0.3>
>     > Filename 'image.elf'.
>     > Load address: 0x93000000
>     > Loading:
>     #################################################################
>     >
>      #################################################################
>     >
>      #################################################################
>     >          ##########################
>     > done
>     > Bytes transferred = 3229878 (3148b6 hex)
>     > Wrong Image Format for bootm command
>     > ERROR: can't get kernel image!
>     >
>     >
>     > ## Checking Image at 93000000 ...
>     > Unknown image format!
>     >
>     > ** Unable to use ace 0:1 for fatls **
>     > U-Boot-mONStR> imi
>     >
>     > Also when I try to read my compact flash, the problem with reading the
>     > ace persists
>     >
>     > U-Boot-mONStR> fatls ace 0
>     > **** ACE CompactFlash not found.
>     > **** ACE CompactFlash not found.
>     > ** Can't read from device 0 **
>     >
>     > This is an screenshot from  u-boot
>     > <http://img519.imageshack.us/img519/5428/ubootev4.png>
>     >
>     >
>     > Kind regards, Juan Pablo Gómez
>     >
>     >
>     >
>     >
>     >
>     >
>     > 2008/10/29 Michal Simek <monstr@xxxxxxxxx
>     <mailto:monstr@xxxxxxxxx> <mailto:monstr@xxxxxxxxx
>     <mailto:monstr@xxxxxxxxx>>>
>     >
>     >     Hi Juan and Monthadar,
>     >
>     >     no. You just load your kernel to different address and then
>     you try
>     >     to load it
>     >     from different one. Your log is weird because your loading address
>     >     is 92000000
>     >     but command tell you that image is loaded to 91000000. I haven't
>     >     seen it yet.
>     >
>     >     Please send your version log. And do make mrproper; make
>     >     "board_name"_config,
>     >     and make.
>     >     Then load u-boot through xmd, connect mb mdm dow u-boot, run, and
>     >     send results.
>     >
>     >     >     > U-Boot-mONStR> tftp 92000000 image.bin
>     >     >     > TFTP from server 192.168.0.12 <http://192.168.0.12>
>     <http://192.168.0.12>
>     >     <http://192.168.0.12>; our IP
>     >     >     address is 192.168.0.3 <http://192.168.0.3>
>     <http://192.168.0.3> <http://192.168.0.3>
>     >     >     > Filename 'image.bin'.
>     >     >     > Load address: 0x91000000
>     >     >     > Loading:
>     >
>     >     Regards,
>     >     Michal
>     >
>     >
>     >     > Hi Monthadar! Actually i'm using a XUPV2P board and there
>     isn't any
>     >     > avaible pre-built kernel for my board.
>     >     >
>     >     > I try to run the go command but again nothing happends.
>     >     >
>     >     > When I execute this command it seems that my image is corrupt or
>     >     > something like that.
>     >     >
>     >     >
>     >     > *U-Boot-mONStR> iminfo*
>     >     >
>     >     > ## Checking Image at 91000000 ...
>     >     > Unknown image format!
>     >     >
>     >     >
>     >     > 2008/10/29 Monthadar Al-Jaberi <monthadar@xxxxxxxxx
>     <mailto:monthadar@xxxxxxxxx>
>     >     <mailto:monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>>
>     >     > <mailto:monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>
>     <mailto:monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>>>>
>     >     >
>     >     >     I meant that if you can try the image.bin file that
>     comes with
>     >     >     petalinux. I think it was named image-2.6.bin or
>     image-2.4.bin? It
>     >     >     should be in the following directory:
>     >     >
>     >     >     $PETALINUX/hardware/reference-design/...
>     >     >
>     >     >     but only if you have the same board as the ones which are
>     >     supplied.
>     >     >
>     >     >
>     >     >
>     >     >     ONE MORE THING: try using the command 'go' instead of
>     'bootm'
>     >     maybe
>     >     >     that helps?
>     >     >
>     >     >     BR,
>     >     >
>     >     >     On Wed, Oct 29, 2008 at 4:38 PM, Juan Pablo Gómez
>     >     >     <juanwalker@xxxxxxxxx <mailto:juanwalker@xxxxxxxxx>
>     <mailto:juanwalker@xxxxxxxxx <mailto:juanwalker@xxxxxxxxx>>
>     >     <mailto:juanwalker@xxxxxxxxx <mailto:juanwalker@xxxxxxxxx>
>     <mailto:juanwalker@xxxxxxxxx <mailto:juanwalker@xxxxxxxxx>>>> wrote:
>     >     >     > Oh ,excuse me... I write incorrectly the address.
>     >     >     >
>     >     >     >
>     >     >     > U-Boot-mONStR> tftp 92000000 image.bin
>     >     >     > TFTP from server 192.168.0.12 <http://192.168.0.12>
>     <http://192.168.0.12>
>     >     <http://192.168.0.12>; our IP
>     >     >     address is 192.168.0.3 <http://192.168.0.3>
>     <http://192.168.0.3> <http://192.168.0.3>
>     >     >     > Filename 'image.bin'.
>     >     >     > Load address: 0x91000000
>     >     >     > Loading:
>     >     >
>     #################################################################
>     >     >     >
>     >     >
>      #################################################################
>     >     >     >
>     >     >
>      #################################################################
>     >     >     >          ######
>     >     >     > done
>     >     >     >
>     >     >     > U-Boot-mONStR> bootm 0x92000000;
>     >     >     > Wrong Image Format for bootm command
>     >     >     > ERROR: can't get kernel image!
>     >     >     >    XIP Invalid Image ... OK
>     >     >     > OK
>     >     >     >
>     >     >     > What do you mean with a pre-built image.bin ? I've tried
>     >     also with
>     >     >     romfs.img
>     >     >     > and the other and all the files have the same error.
>     >     >     >
>     >     >     > These are the files that are in /tftproot directory
>     after the
>     >     >     compilation of
>     >     >     > the kernel (Was sucessful ).
>     >     >     >
>     >     >     > image.bin  image.elf  image.srec  linux.bin  romfs.img
>     >     >     >
>     >     >     >
>     >     >     >
>     >     >     >
>     >     >     >
>     >     >     >
>     >     >     > 2008/10/29 Monthadar Al-Jaberi <monthadar@xxxxxxxxx
>     <mailto:monthadar@xxxxxxxxx>
>     >     <mailto:monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>>
>     >     >     <mailto:monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>
>     <mailto:monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>>>>
>     >     >     >>
>     >     >     >> Have you tried the pre-built image.bin with the
>     u-boot you have
>     >     >     compiled?
>     >     >     >>
>     >     >     >> Also why are you saving it to address 0x91000000 and then
>     >     booting
>     >     >     from
>     >     >     >> address 0x92000000?
>     >     >     >>
>     >     >     >> BR,
>     >     >     >>
>     >     >     >> On Wed, Oct 29, 2008 at 6:39 AM, Juan Pablo Gómez
>     >     >     <juanwalker@xxxxxxxxx <mailto:juanwalker@xxxxxxxxx>
>     <mailto:juanwalker@xxxxxxxxx <mailto:juanwalker@xxxxxxxxx>>
>     >     <mailto:juanwalker@xxxxxxxxx <mailto:juanwalker@xxxxxxxxx>
>     <mailto:juanwalker@xxxxxxxxx <mailto:juanwalker@xxxxxxxxx>>>>
>     >     >     >> wrote:
>     >     >     >> > Hi
>     >     >     >> >
>     >     >     >> > I'm trying to run my kernel image from u-boot but this
>     >     appears :
>     >     >     >> >
>     >     >     >> > U-Boot-mONStR> tftp 91000000 image.bin
>     >     >     >> > TFTP from server 192.168.0.12 <http://192.168.0.12>
>     <http://192.168.0.12>
>     >     <http://192.168.0.12>; our IP
>     >     >     address is 192.168.0.3 <http://192.168.0.3>
>     <http://192.168.0.3> <http://192.168.0.3>
>     >     >     >> > Filename 'image.bin'.
>     >     >     >> > Load address: 0x91000000
>     >     >     >> > Loading:
>     >     >     >> >
>     >     #################################################################
>     >     >     >> >
>     >     >     >> >
>     >      #################################################################
>     >     >     >> >
>     >     >     >> >
>     >      #################################################################
>     >     >     >> >          ######
>     >     >     >> > done
>     >     >     >> >
>     >     >     >> > U-Boot-mONStR> bootm 0x92000000;
>     >     >     >> > Wrong Image Format for bootm command
>     >     >     >> > ERROR: can't get kernel image!
>     >     >     >> >    XIP Invalid Image ... OK
>     >     >     >> > OK
>     >     >     >> >
>     >     >     >> > I've compiled the kernel succesfully, I don't know why
>     >     this is
>     >     >     ocurring,
>     >     >     >> > anyone knows?
>     >     >     >> >
>     >     >     >> > Thank you for help me
>     >     >     >> >
>     >     >     >> >
>     >     >     >> >
>     >     >     >> > --
>     >     >     >> > Muchas gracias.
>     >     >     >> >
>     >     >     >> > Atentamente, Juan Pablo Gómez
>     >     >     >> >
>     >     >     >>
>     >     >     >>
>     >     >     >>
>     >     >     >> --
>     >     >     >> //Monthadar Al Jaberi
>     >     >     >>
>     >     >     >> ___________________________
>     >     >     >> microblaze-uclinux mailing list
>     >     >     >> microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
>     >     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
>     >     >     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
>     >     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>>
>     >     >     >> Project Home Page :
>     >     >     http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     >     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     >     >     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     >     >     >> Mailing List Archive :
>     >     >     >>
>     http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>     >     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>     >     >     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>     >     >     >>
>     >     >     >
>     >     >     >
>     >     >     >
>     >     >     > --
>     >     >     > Muchas gracias.
>     >     >     >
>     >     >     > Atentamente, Juan Pablo Gómez
>     >     >     >
>     >     >
>     >     >
>     >     >
>     >     >     --
>     >     >     //Monthadar Al Jaberi
>     >     >
>     >     >     ___________________________
>     >     >     microblaze-uclinux mailing list
>     >     >     microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
>     >     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
>     >     >     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
>     >     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>>
>     >     >     Project Home Page :
>     >     >     http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     >     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     >     >     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     >     >     Mailing List Archive :
>     >     >     http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>     >     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>     >     >     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>     >     >
>     >     >
>     >     >
>     >     >
>     >     > --
>     >     > Muchas gracias.
>     >     >
>     >     > Atentamente, Juan Pablo Gómez
>     >     ___________________________
>     >     microblaze-uclinux mailing list
>     >     microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
>     >     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
>     >     Project Home Page :
>     >     http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     >     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     >     Mailing List Archive :
>     >     http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>     >     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>     >
>     >
>     >
>     >
>     > --
>     > Muchas gracias.
>     >
>     > Atentamente, Juan Pablo Gómez
>     ___________________________
>     microblaze-uclinux mailing list
>     microblaze-uclinux@xxxxxxxxxxxxxx
>     <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
>     Project Home Page :
>     http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>     <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
>     Mailing List Archive :
>     http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>     <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>
>
>
>
> --
> Muchas gracias.
>
> Atentamente, Juan Pablo Gómez
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/




--
Muchas gracias.

Atentamente, Juan Pablo Gómez



--
Muchas gracias.

Atentamente, Juan Pablo Gómez