[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] Problems booting petalinux kernel & system_ace
Hi Juan,
Just image.ub is enough for both kernels.
You read manual about fdt kernel - there is different booting style where is
separated linux kernel and rootfs. In Petalogix kernel is linux and rootfs in
one pack that's why you should load image.ub.
Regards,
Michal
Juan Pablo Gómez wrote:
> Hi Michal, I've read you guide and I follow the steps but I can't boot
> the kernel correctly.
>
> This is the u-boot log
>
> *U-Boot-mONStR> tftp 92000000 linux.ub*
> TFTP from server 192.168.0.12 <http://192.168.0.12>; our IP address is
> 192.168.0.3 <http://192.168.0.3>
> Filename 'linux.ub'.
> Load address: 0x92000000
> Loading: #################################################################
> #################################################################
> ####
> done
> Bytes transferred = 1953856 (1dd040 hex)
> *U-Boot-mONStR> tftp 93000000 romfs.ub*
> TFTP from server 192.168.0.12 <http://192.168.0.12>; our IP address is
> 192.168.0.3 <http://192.168.0.3>
> Filename 'romfs.ub'.
> Load address: 0x93000000
> Loading: #################################################################
> #################################################################
> #################################################################
> ######
> done
> Bytes transferred = 2949210 (2d005a hex)
> *U-Boot-mONStR> bootm 0x92000000 0x93000000*
> ## Booting kernel from Legacy Image at 92000000 ...
> Image Name: petalinux
> Image Type: MicroBlaze Linux Kernel Image (uncompressed)
> Data Size: 1953792 Bytes = 1.9 MB
> Load Address: 92000000
> Entry Point: 92000000
> Verifying Checksum ... OK
> ## Loading init Ramdisk from Legacy Image at 93000000 ...
> Image Name: File system without network
> Image Type: MicroBlaze Linux RAMDisk Image (uncompressed)
> Data Size: 2949146 Bytes = 2.8 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> XIP Kernel Image ... OK
> OK
>
> And u-boot freeze
>
> Many thanks!
>
> 2008/10/30 Juan Pablo Gómez <juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>
>
> Ok, I'm reading the article of the wiki for solve my doubts
>
> http://monstr.eu/wiki/doku.php?id=fdt:fdt
>
> This is the first thing that I should have done :-)
>
>
>
>
> 2008/10/30 Juan Pablo Gómez <juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>
>
> Hi Michal, thank you for help me!
>
> this is what I did :
>
> I run this command as you said :
>
>
> *./tools/mkimage -A microblaze -O linux -T kernel -C none -a
> 0x92000000 -e 0x921e0000 -n petalinux
> -d /tftpboot/linux.bin /tftpboot/linux.ub*
>
>
> Image Name: petalinux
> Created: Thu Oct 30 17:11:34 2008
> Image Type: MicroBlaze Linux Kernel Image (uncompressed)
> Data Size: 1953792 Bytes = 1908.00 kB = 1.86 MB
> Load Address: 92000000
> Entry Point: 921e0000
>
> My u-boot textBase and CFG_LOAD_ADDR:
>
> *#define TEXT_BASE 0x91000000
> #define CFG_LOAD_ADDR 0x92000000 /* default load address */*
>
> I write that entry point because the size of hte linux.ub is
> 0x1dd040, then used that entry point
>
>
> Now, in u-boot I execute :
>
>
> *U-Boot-mONStR> base 0;tftp 91900000 linux.ub;bootm*
> Base Address: 0x00000000
> TFTP from server 192.168.0.12 <http://192.168.0.12>; our IP
> address is 192.168.0.3 <http://192.168.0.3>
> Filename 'linux.ub'.
> Load address: 0x91900000
> Loading:
> #################################################################
>
> #################################################################
> ####
> done
> Bytes transferred = 1953856 (1dd040 hex)
>
> ## Booting kernel from Legacy Image at 91900000 ...
> Image Name: petalinux
> Image Type: MicroBlaze Linux Kernel Image (uncompressed)
> Data Size: 1953792 Bytes = 1.9 MB
> Load Address: 92000000
> Entry Point: 921e0000
> Verifying Checksum ... OK
> Loading Kernel Image ... OK
> OK
>
> And then all freeze.
> It could be any problem with the address assignation?
>
> Regards, Juan
>
>
>
>
>
> 2008/10/30 Michal Simek <monstr@xxxxxxxxx <mailto:monstr@xxxxxxxxx>>
>
> Hi Juan,
>
> just select build u-boot just for creating image.ub. You
> don't need to use
> u-boot from petalogix dist. And of course you can generate
> this file with
> mkimage tool.
>
> Regards,
> Michal
>
> Juan Pablo Gómez wrote:
> > Hi Michal, Ok thank you for explain me that. In my kernel
> configuration
> > I not selected Build u-boot because I'm using your u-boot,
> how I can
> > generate this file??
> >
> > Thank you again Michal!
> >
> > 2008/10/30 Michal Simek <monstr@xxxxxxxxx
> <mailto:monstr@xxxxxxxxx> <mailto:monstr@xxxxxxxxx
> <mailto:monstr@xxxxxxxxx>>>
> >
> > Hi Juan,
> >
> > image.ub is supported. U-BOOT doesn't know with bootm
> command what
> > is elf and
> > with linux kernel can't handle this.
> >
> > Some comments below.
> >
> > Regards,
> > Michal
> >
> >
> > > Hi!.
> > >
> > > Ok, let me post this new log, excuse for the last one.
> > >
> > > First of all, let me explain what I do step by step :
> > >
> > > I build my hardware without any program in my BRAM
> and then download
> > > the bitsream
> > >
> > > I modify include/configs/xupv2p.h
> > >
> > > I add this line : #define TEXT_BASE
> 0x92000000
> > >
> > > Then I execute
> > >
> > > *$make mrproper
> > > $make xupv2p_config
> > > $make*
> > > (Log from the compilation
> <http://pastebin.com/f33b01b15>, many times
> > > this warning this warning was showed in different
> files like this
> > one :
> > > include/asm/byteorder.h:31: warning: type
> qualifiers ignored on
> > > function return type)
> >
> > source petalogix setting.sh script
> > export CROSS_COMPILE=microblaze-uclinux-
> >
> > >
> > > Then I copy the u-boot file to my project.
> > > *
> > > $cp u-boot $XUP_V2P_PROJECT_DIRECTORY*
> > >
> > > Then I connect my board to the XMD
> > >
> > > *$ xmd -xmp system.xmp -opt etc/xmd_microblaze_0.opt*
> > >
> > > Then execute
> > > *
> > > connect mb mdm ; dow u-boot ; run;*
> > >
> > > (This is the log from XMD
> <http://pastebin.com/f1b379b61>)
> > >
> > > At moment when I try to load the image.elf file this
> is ocurrs :
> > image.ub here.
> > >
> > > U-Boot-mONStR> tftp 93000000 image.elf; bootm
> > > TFTP from server 192.168.0.12 <http://192.168.0.12>
> <http://192.168.0.12>
> > <http://192.168.0.12>; our IP address is
> > > 192.168.0.3 <http://192.168.0.3>
> <http://192.168.0.3> <http://192.168.0.3>
> > > Filename 'image.elf'.
> > > Load address: 0x93000000
> > > Loading:
> >
> #################################################################
> > >
> >
> #################################################################
> > >
> >
> #################################################################
> > > ##########################
> > > done
> > > Bytes transferred = 3229878 (3148b6 hex)
> > > Wrong Image Format for bootm command
> > > ERROR: can't get kernel image!
> > >
> > >
> > > ## Checking Image at 93000000 ...
> > > Unknown image format!
> > >
> > > ** Unable to use ace 0:1 for fatls **
> > > U-Boot-mONStR> imi
> > >
> > > Also when I try to read my compact flash, the
> problem with reading the
> > > ace persists
> > >
> > > U-Boot-mONStR> fatls ace 0
> > > **** ACE CompactFlash not found.
> > > **** ACE CompactFlash not found.
> > > ** Can't read from device 0 **
> > >
> > > This is an screenshot from u-boot
> > > <http://img519.imageshack.us/img519/5428/ubootev4.png>
> > >
> > >
> > > Kind regards, Juan Pablo Gómez
> > >
> > >
> > >
> > >
> > >
> > >
> > > 2008/10/29 Michal Simek <monstr@xxxxxxxxx
> <mailto:monstr@xxxxxxxxx>
> > <mailto:monstr@xxxxxxxxx <mailto:monstr@xxxxxxxxx>>
> <mailto:monstr@xxxxxxxxx <mailto:monstr@xxxxxxxxx>
> > <mailto:monstr@xxxxxxxxx <mailto:monstr@xxxxxxxxx>>>>
> > >
> > > Hi Juan and Monthadar,
> > >
> > > no. You just load your kernel to different
> address and then
> > you try
> > > to load it
> > > from different one. Your log is weird because
> your loading address
> > > is 92000000
> > > but command tell you that image is loaded to
> 91000000. I haven't
> > > seen it yet.
> > >
> > > Please send your version log. And do make
> mrproper; make
> > > "board_name"_config,
> > > and make.
> > > Then load u-boot through xmd, connect mb mdm dow
> u-boot, run, and
> > > send results.
> > >
> > > > > U-Boot-mONStR> tftp 92000000 image.bin
> > > > > TFTP from server 192.168.0.12
> <http://192.168.0.12> <http://192.168.0.12>
> > <http://192.168.0.12>
> > > <http://192.168.0.12>; our IP
> > > > address is 192.168.0.3
> <http://192.168.0.3> <http://192.168.0.3>
> > <http://192.168.0.3> <http://192.168.0.3>
> > > > > Filename 'image.bin'.
> > > > > Load address: 0x91000000
> > > > > Loading:
> > >
> > > Regards,
> > > Michal
> > >
> > >
> > > > Hi Monthadar! Actually i'm using a XUPV2P
> board and there
> > isn't any
> > > > avaible pre-built kernel for my board.
> > > >
> > > > I try to run the go command but again nothing
> happends.
> > > >
> > > > When I execute this command it seems that my
> image is corrupt or
> > > > something like that.
> > > >
> > > >
> > > > *U-Boot-mONStR> iminfo*
> > > >
> > > > ## Checking Image at 91000000 ...
> > > > Unknown image format!
> > > >
> > > >
> > > > 2008/10/29 Monthadar Al-Jaberi
> <monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>
> > <mailto:monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>>
> > > <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx> <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx>>>
> > > > <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx> <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx>>
> > <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx> <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx>>>>>
> > > >
> > > > I meant that if you can try the image.bin
> file that
> > comes with
> > > > petalinux. I think it was named
> image-2.6.bin or
> > image-2.4.bin? It
> > > > should be in the following directory:
> > > >
> > > > $PETALINUX/hardware/reference-design/...
> > > >
> > > > but only if you have the same board as the
> ones which are
> > > supplied.
> > > >
> > > >
> > > >
> > > > ONE MORE THING: try using the command 'go'
> instead of
> > 'bootm'
> > > maybe
> > > > that helps?
> > > >
> > > > BR,
> > > >
> > > > On Wed, Oct 29, 2008 at 4:38 PM, Juan
> Pablo Gómez
> > > > <juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx> <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>
> > <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx> <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>>
> > > <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx> <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>
> > <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx> <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>>>> wrote:
> > > > > Oh ,excuse me... I write incorrectly the
> address.
> > > > >
> > > > >
> > > > > U-Boot-mONStR> tftp 92000000 image.bin
> > > > > TFTP from server 192.168.0.12
> <http://192.168.0.12> <http://192.168.0.12>
> > <http://192.168.0.12>
> > > <http://192.168.0.12>; our IP
> > > > address is 192.168.0.3
> <http://192.168.0.3> <http://192.168.0.3>
> > <http://192.168.0.3> <http://192.168.0.3>
> > > > > Filename 'image.bin'.
> > > > > Load address: 0x91000000
> > > > > Loading:
> > > >
> >
> #################################################################
> > > > >
> > > >
> >
> #################################################################
> > > > >
> > > >
> >
> #################################################################
> > > > > ######
> > > > > done
> > > > >
> > > > > U-Boot-mONStR> bootm 0x92000000;
> > > > > Wrong Image Format for bootm command
> > > > > ERROR: can't get kernel image!
> > > > > XIP Invalid Image ... OK
> > > > > OK
> > > > >
> > > > > What do you mean with a pre-built
> image.bin ? I've tried
> > > also with
> > > > romfs.img
> > > > > and the other and all the files have the
> same error.
> > > > >
> > > > > These are the files that are in
> /tftproot directory
> > after the
> > > > compilation of
> > > > > the kernel (Was sucessful ).
> > > > >
> > > > > image.bin image.elf image.srec
> linux.bin romfs.img
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > 2008/10/29 Monthadar Al-Jaberi
> <monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>
> > <mailto:monthadar@xxxxxxxxx <mailto:monthadar@xxxxxxxxx>>
> > > <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx> <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx>>>
> > > > <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx> <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx>>
> > <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx> <mailto:monthadar@xxxxxxxxx
> <mailto:monthadar@xxxxxxxxx>>>>>
> > > > >>
> > > > >> Have you tried the pre-built image.bin
> with the
> > u-boot you have
> > > > compiled?
> > > > >>
> > > > >> Also why are you saving it to address
> 0x91000000 and then
> > > booting
> > > > from
> > > > >> address 0x92000000?
> > > > >>
> > > > >> BR,
> > > > >>
> > > > >> On Wed, Oct 29, 2008 at 6:39 AM, Juan
> Pablo Gómez
> > > > <juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx> <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>
> > <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx> <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>>
> > > <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx> <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>
> > <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx> <mailto:juanwalker@xxxxxxxxx
> <mailto:juanwalker@xxxxxxxxx>>>>>
> > > > >> wrote:
> > > > >> > Hi
> > > > >> >
> > > > >> > I'm trying to run my kernel image
> from u-boot but this
> > > appears :
> > > > >> >
> > > > >> > U-Boot-mONStR> tftp 91000000 image.bin
> > > > >> > TFTP from server 192.168.0.12
> <http://192.168.0.12> <http://192.168.0.12>
> > <http://192.168.0.12>
> > > <http://192.168.0.12>; our IP
> > > > address is 192.168.0.3
> <http://192.168.0.3> <http://192.168.0.3>
> > <http://192.168.0.3> <http://192.168.0.3>
> > > > >> > Filename 'image.bin'.
> > > > >> > Load address: 0x91000000
> > > > >> > Loading:
> > > > >> >
> > >
> #################################################################
> > > > >> >
> > > > >> >
> > >
> #################################################################
> > > > >> >
> > > > >> >
> > >
> #################################################################
> > > > >> > ######
> > > > >> > done
> > > > >> >
> > > > >> > U-Boot-mONStR> bootm 0x92000000;
> > > > >> > Wrong Image Format for bootm command
> > > > >> > ERROR: can't get kernel image!
> > > > >> > XIP Invalid Image ... OK
> > > > >> > OK
> > > > >> >
> > > > >> > I've compiled the kernel succesfully,
> I don't know why
> > > this is
> > > > ocurring,
> > > > >> > anyone knows?
> > > > >> >
> > > > >> > Thank you for help me
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> > --
> > > > >> > Muchas gracias.
> > > > >> >
> > > > >> > Atentamente, Juan Pablo Gómez
> > > > >> >
> > > > >>
> > > > >>
> > > > >>
> > > > >> --
> > > > >> //Monthadar Al Jaberi
> > > > >>
> > > > >> ___________________________
> > > > >> microblaze-uclinux mailing list
> > > > >> microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
> > > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>>
> > > > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
> > > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>>>
> > > > >> Project Home Page :
> > > >
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > >
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > > >
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > > > >> Mailing List Archive :
> > > > >>
> >
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> > >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> > > >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> > > > >>
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Muchas gracias.
> > > > >
> > > > > Atentamente, Juan Pablo Gómez
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > //Monthadar Al Jaberi
> > > >
> > > > ___________________________
> > > > microblaze-uclinux mailing list
> > > > microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
> > > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>>
> > > > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
> > > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>>>
> > > > Project Home Page :
> > > >
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > >
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > > >
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > > > Mailing List Archive :
> > > >
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> > >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> > > >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Muchas gracias.
> > > >
> > > > Atentamente, Juan Pablo Gómez
> > > ___________________________
> > > microblaze-uclinux mailing list
> > > microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
> > > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>>
> > > Project Home Page :
> > >
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > >
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > > Mailing List Archive :
> > >
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> > >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> > >
> > >
> > >
> > >
> > > --
> > > Muchas gracias.
> > >
> > > Atentamente, Juan Pablo Gómez
> > ___________________________
> > microblaze-uclinux mailing list
> > microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> > <mailto:microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>
> > Project Home Page :
> > http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> > Mailing List Archive :
> >
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> >
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
> >
> >
> >
> >
> > --
> > Muchas gracias.
> >
> > Atentamente, Juan Pablo Gómez
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>
> Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>
>
>
>
>
> --
> Muchas gracias.
>
> Atentamente, Juan Pablo Gómez
>
>
>
>
> --
> Muchas gracias.
>
> Atentamente, Juan Pablo Gómez
>
>
>
>
> --
> Muchas gracias.
>
> Atentamente, Juan Pablo Gómez
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/