[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] Getting started with uClinux on Digilent Spartan-3 board
Hi Xavier,
> Hi Michal,
>
> It is for a project at university so I don't need to run applications,
> it is mostly to "demonstrate" that it works (or will, I hope).
> Is it possible to start from the boards you mentioned to get the
> Spartan-3 running by editing some configuration files?
There are prepared packages, hw designs, precompiled kernel. Look at
hardware/reference-designs/pre-built/ folder. And tutorials which are at
http://developer.petalogix.com/.
Regards,
Michal
> Regards,
> Xavier.
>
> On Wed, Feb 18, 2009 at 6:33 PM, Michal Simek
> <michal.simek@xxxxxxxxxxxxx> wrote:
>> Hi Xavier
>>
>>> Thanks for the advice but I already tried that and the Spartan-3 board
>>> doesn't seem to be supported by the tools from petalogix.
>> Spartan3E500 and Spartan3E1600 are supported. Your previous question was around
>> size of memory.
>> The right question is what you want to do with it. If you want to run only your
>> simple application on linux I believe you can run linux on 1MB memory but
>> without any other functionality. If you want to have shell and any linux apps
>> you need more.
>> Size of memory always depend on your requirements.
>>
>> Regards,
>> Michal
>>
>>> On Wed, Feb 18, 2009 at 1:52 PM, Olof Backing <olof.backing@xxxxxxxxxxxx> wrote:
>>>> On 18 feb 2009, at 11.44, Xavier Langellier wrote:
>>>>
>>>>> I'm new to uClinux on microblaze and I would like to get it running on a
>>>>> Spartan-3 board.
>>>>> First of all, is it possible to fit uClinux to the 1Mb RAM of this board.
>>>>> I read the two answers, is it yes or no?
>>>>> What is the preferred way to understand how to make uClinux work on
>>>>> microblaze (some documentation), microblaze-uclinux or petalogix? Is there
>>>>> already a port to this board, I can study to start?
>>>> Go and have a look at developer.petalogix.com and give petalinux a try.
>>>>
>>>> Regards,
>>>> Olof
>>>> --
>>>> Olof Backing
>>>> CAG Contactor AB Office: +46 (0)8 752 81 00
>>>> Finlandsgatan 14 Mobile: +46 (0)70 995 98 99
>>>> SE-164 74 KISTA Fax: +46 (0)8 752 05 30
>>>>
>>>> ___________________________
>>>> microblaze-uclinux mailing list
>>>> microblaze-uclinux@xxxxxxxxxxxxxx
>>>> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>>>> Mailing List Archive :
>>>> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>>>>
>>>>
>>>
>>>
>> --
>> Michal Simek, Ing. (M.Eng)
>> PetaLogix - Linux Solutions for a Reconfigurable World
>> w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
>> ___________________________
>> microblaze-uclinux mailing list
>> microblaze-uclinux@xxxxxxxxxxxxxx
>> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>>
>>
>
>
>
--
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/