[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] system booting problem
Faiza Ait-Kaci wrote:
> Hi,
>
> chekking in /petalinux-dist/romfs/etc/inittab I get:
>
> ttyUL0:vt100:/bin/agetty 115200 ttyUL0
> flt:unknown:/bin/flatfsd
> inet:unknown:/bin/inetd /etc/inetd.conf
>
> Should I modify this file?
it is ok. You have there eth - can you try to telnet to board?
Regards,
Michal
>
> ----- Mail Original -----
> De: "Michal Simek" <michal.simek@xxxxxxxxxxxxx>
> À: microblaze-uclinux@xxxxxxxxxxxxxx
> Envoyé: Mardi 21 Juillet 2009 14h00:42 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / Vienne
> Objet: Re: [microblaze-uclinux] system booting problem
>
> Hi,
>
> check your /etc/inittab
> There should be something like
>
> ttyUL0:vt100:respawn:/sbin/getty 115200 ttyUL0
>
> Regards,
> Michal
>
>
> Faiza Ait-Kaci wrote:
>> Hi,
>>
>> I am trying to boot the petalinux-dist on a Spartan3E-RevC starter kit. not being able to use the DTE port ,I created my own EDK project with same features except that I use the DCE port.
>>
>> For u-boot, since I am not using tftp but serial connection for downloads, I downloaded to the Flash with the u-boot "loadb" command the following files:
>>
>> u-boot-s.bin at address 0x85000000 (sector 0 of Flash)
>>
>> ub.config.img 0x85020000 (sector 1)
>>
>> image.ub 0x85080000 (sector 5)
>>
>> (I choosed these adresses by lookin to the result of the "printenv")
>>
>> after the downloads, I reset the board.
>> the booting of the system started but stopped before the uclinux login prompt. Can anyone help me find what step went wrong?
>>
>> Here is the log:
>> -----------------------------------------------------------------------------
>>
>> =================================================
>> FS-BOOT First Stage Bootloader (c) 2006 PetaLogix
>> Project name: DCE_Test
>> Build date: Jul 20 2009 09:58:46 FS
>> Serial console: Uartlite
>> =================================================
>> FS-BOOT: System initialisation completed.
>> FS-BOOT: Booting from FLASH. Press 's' for image download.
>> FS-BOOT: Booting image...
>> SDRAM :
>> Enabling caches :
>> Icache:OK
>> Dcache:OK
>> U-Boot Start:0x87fc0000
>> Malloc Start:0x87f80000
>> Board Info Start:0x87f7ffd0
>> Boot Parameters Start:0x87f6ffd0
>> FLASH: 16 MB
>> ETHERNET: MAC:00:0a:35:00:22:01
>>
>> *** Warning - bad CRC, using default environment
>>
>> Hit any key to stop autoboot: 0
>> ## Booting image at 85080000 ...
>> Image Name: PetaLinux Kernel 2.6
>> Image Type: Microblaze Linux Kernel Image (uncompressed)
>> Data Size: 2760848 Bytes = 2.6 MB
>> Load Address: 86000000
>> Entry Point: 86000000
>> Verifying Checksum ... OK
>> OK
>> Found romfs @ 0x861b308c (0x000ef000)
>> #### klimit 861cb000 ####
>> Moving 0x000ef000 bytes from 0x861b308c to 0x861ca880
>> New klimit: 0x862ba000
>> Linux version 2.6.20-uc0 (faiza@desktop) (gcc version 3.4.1 ( PetaLinux 0.20 Build -rc1 050607 )) #4 Mon Jul 20 10:13:57 CEST 2009
>> setup_cpuinfo: initialising
>> setup_cpuinfo: No PVR support in CPU. Using static compile-time info
>> set_cpuinfo_static: Using static CPU info.
>> setup_memory: max_mapnr: 0x87fff
>> setup_memory: min_low_pfn: 0x86000
>> setup_memory: max_low_pfn: 0x2000
>> On node 0 totalpages: 8192
>> DMA zone: 64 pages used for memmap
>> DMA zone: 0 pages reserved
>> DMA zone: 8128 pages, LIFO batch:0
>> Normal zone: 0 pages used for memmap
>> Built 1 zonelists. Total pages: 8128
>> Kernel command line: mtdparts=physmap-flash.0:256K(boot),128K(bootenv),128K(config),4M(image),11M(spare) macaddr=00:0a:35:00:22:01 console=ttyUL0,115200
>> OPB INTC #0 at 0x81800000
>> PID hash table entries: 128 (order: 7, 512 bytes)
>> TIMER at 0x83C00000
>> disabling early console
>> Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
>> Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
>> Memory: 29688k/32768k available
>> Calibrating delay loop... 49.45 BogoMIPS (lpj=247296)
>> Mount-cache hash table entries: 512
>> NET: Registered protocol family 16
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
>> TCP established hash table entries: 1024 (order: 0, 4096 bytes)
>> TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
>> TCP: Hash tables configured (established 1024 bind 1024)
>> TCP reno registered
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> xgpio0 #0 at 0x81420000 mapped to 0x81420000 device: 10,185 using IRQ#3
>> xgpio1 #1 at 0x81400000 mapped to 0x81400000 device: 10,186 using IRQ#2
>> uartlite.0: ttyUL0 at MMIO 0x84000000 (irq = 4) is a uartlite
>> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>> eth0: using fifo mode.
>> eth0: No PHY detected. Assuming a PHY at address 0.
>> eth0: Xilinx EMACLite #0 at 0x81000000 mapped to 0x81000000, irq=1
>> physmap platform flash device: 01000000 at 85000000
>> physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
>> Intel/Sharp Extended Query Table at 0x0031
>> Using buffer write method
>> cfi_cmdset_0001: Erase suspend on write enabled
>> erase region 0: offset=0x0,size=0x20000,blocks=128
>> 5 cmdlinepart partitions found on MTD device physmap-flash.0
>> Creating 5 MTD partitions on "physmap-flash.0":
>> 0x00000000-0x00040000 : "boot"
>> 0x00040000-0x00060000 : "bootenv"
>> 0x00060000-0x00080000 : "config"
>> 0x00080000-0x00480000 : "image"
>> 0x00480000-0x00f80000 : "spare"
>> uclinux[mtd]: RAM probe address=0x861ca880 size=0xef000
>> Creating 1 MTD partitions on "RAM":
>> 0x00000000-0x000ef000 : "ROMfs"
>> uclinux[mtd]: set ROMfs to be root filesystem index=5
>> TCP cubic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> VFS: Mounted root (cramfs filesystem) readonly.
>> Freeing unused kernel memory: 84k freed
>> -------------------------------------------------------------------
>>
>> ___________________________
>> microblaze-uclinux mailing list
>> microblaze-uclinux@xxxxxxxxxxxxxx
>> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>>
>>
>
--
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/