[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] problem with "petalinux-copy-autoconfig" command...
Hi,
The problem may come from the bash versus sh trouble!
See if sh is really bash on your system.
Regards,
Faiza
----- Mail Original -----
De: "Orlando Landrove Gámez" <landrove@xxxxxxxxxx>
À: microblaze-uclinux@xxxxxxxxxxxxxx
Envoyé: Mardi 21 Juillet 2009 16h56:52 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / Vienne
Objet: [microblaze-uclinux] problem with "petalinux-copy-autoconfig" command...
Hi,
I tried to make my hardware part of the petalinux, I certainly did it (no errors, 9 warning), Now, following with manuals, Now I'm in step of "petalinux-copy-autoconfig" command, used to copy required hardware project file to petalinux directories.
The specific error says: "Line 52, Ilegal -1". I inserted " petalinux-copy-autoconfig system.xmp" in the path of EDK hardware project XilinxSpartan3E-revD-lite101 , I observed in "petalinux-copy-autoconfig" file there is " exit -1 " in line 52 as the end of a function. I removed "-1", but it did 'nt work, I do not know if the error is in the script it self, or anything else. I am using petalinux 0.4 version. Maybe if I know what files of EDK project directory must be copied (autoconfig.in & Kconfig.auto ?..) and the destiny directory I could do it manually.....
Please, if any of you have similar problem of "petalinux-copy-autoconfig " command, and solved, please, I 'll appreciate very much the ansewer....
Regards, Orlando.
----- Original Message -----
From: "John Williams" < john.williams@xxxxxxxxxxxxx >
To: < microblaze-uclinux@xxxxxxxxxxxxxx >
Sent: Wednesday, July 15, 2009 6:40 PM
Subject: Re: [microblaze-uclinux] Specific Hardware for petalinux ?
> Hi Orlando,
>
> On Thu, Jul 16, 2009 at 2:12 AM, Orlando Landrove
> Gámez< landrove@xxxxxxxxxx > wrote:
>
> [snip]
>
>> Please, if you got an idea if I must do anything else of just install
>> 10.1.03 SP, I wondered if in the starting "EDK 10.1.03" then its driver
>> would get update....but it does'nt look like that...and that's why not open
>> the XilinxSpartan3E-revD-lite101 files, because they are created by 10.1.1
>> SP2. I think if I get Sp3 drivers update all my problems will dissapear, but
>> if not, I then continue with the adjusted project I did.
>
> Probably worth trying a fresh install - 10.1 from DVD, then just apply
> SP3 directly.
>
> Make sure you do you tool installation and upgrade as the root user,
> and do your petalinux work as a regular user. Never do normal work as
> root!
>
> Regards,
>
> John
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
>
----- Original Message -----
From: Orlando Landrove Gámez
To: microblaze-uclinux@xxxxxxxxxxxxxx
Sent: Tuesday, July 21, 2009 7:43 AM
Subject: Re: [microblaze-uclinux] Specific Hardware for petalinux ?
Hi,
I tried to make my hardware part of the petalinux, I certainly did it (no errors, 9 warning), Now, following with manuals, Now I'm in step of "petalinux-copy-autoconfig" command, used to copy required hardware project file to petalinux directories.
The specific error say: "Line 52, Ilegal -1". I inserted " petalinux-copy-autoconfig system.xmp" in the path of EDK hardware project XilinxSpartan3E-revD-lite101 , I observed in "petalinux-copy-autoconfig" file there is " exit -1 " in line 52 as the end of a function. I removed "-1", but it did 'nt work, I do not know if the error is in the script it self, or anything else. I am using petalinux 0.4 version. Maybe if I know what files of EDK project directory must be copied into petalinux directories I could do it manually.....
Please, if any of you have similar problem of "petalinux-copy-autoconfig " command, and solved, please, I 'll appreciate very much the ansewer....
Regards, Orlando.
----- Original Message -----
From: "John Williams" < john.williams@xxxxxxxxxxxxx >
To: < microblaze-uclinux@xxxxxxxxxxxxxx >
Sent: Wednesday, July 15, 2009 6:40 PM
Subject: Re: [microblaze-uclinux] Specific Hardware for petalinux ?
> Hi Orlando,
>
> On Thu, Jul 16, 2009 at 2:12 AM, Orlando Landrove
> Gámez< landrove@xxxxxxxxxx > wrote:
>
> [snip]
>
>> Please, if you got an idea if I must do anything else of just install
>> 10.1.03 SP, I wondered if in the starting "EDK 10.1.03" then its driver
>> would get update....but it does'nt look like that...and that's why not open
>> the XilinxSpartan3E-revD-lite101 files, because they are created by 10.1.1
>> SP2. I think if I get Sp3 drivers update all my problems will dissapear, but
>> if not, I then continue with the adjusted project I did.
>
> Probably worth trying a fresh install - 10.1 from DVD, then just apply
> SP3 directly.
>
> Make sure you do you tool installation and upgrade as the root user,
> and do your petalinux work as a regular user. Never do normal work as
> root!
>
> Regards,
>
> John
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/