RE: [microblaze-uclinux] stuck at the uclinux prompt

["Jalil Boukhobza" <boukhobza@xxxxxxxxxxxxx>]

You were right John, that was the serial cable that didn't work in emission
mode (from the host). Everything was ok with the new one.
Thanks
Jalil.B

> -----Message d'origine-----
> De : owner-microblaze-uclinux@xxxxxxxxxxxxxxxxxxxx [mailto:owner-
> microblaze-uclinux@xxxxxxxxxxxxxxxxxxxx] De la part de John Williams
> Envoyé : mardi 21 juillet 2009 13:36
> À : microblaze-uclinux@xxxxxxxxxxxxxx
> Objet : Re: [microblaze-uclinux] stuck at the uclinux prompt
> 
> On Tue, Jul 21, 2009 at 8:52 PM, Jalil Boukhobza<boukhobza@univ-
> brest.fr> wrote:
> > Thanks for the answer John.
> >
> > It is a serial/serial cable !
> 
> Can you confirm input from PC -> serial -> board is working OK, maybe
> with u-boot or similar?
> 
> Regards,
> 
> John
> --
> John Williams, PhD, B.Eng, B.IT
> PetaLogix - Linux Solutions for a Reconfigurable World
> w: www.petalogix.com  p: +61-7-30090663  f: +61-7-30090663
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-
> uclinux/



___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/