RE: [microblaze-uclinux] Changing ethernet MAC for production(speeding up the process)

["Brettschneider Falk" <fbrettschneider@xxxxxxxxxxxxxxx>]

Hi,
> From: hoefle marco [mailto:marco.hoefle@xxxxxxxxxxxxx]:
> When ethaddr and macaddr are set correctly the ethernet lite driver
> should use the "new" mac address, right?
Yes, the bootloader will pass your edited flash data to the kernel as command-line parameters.
You must tweek the CRC checksum of the flash data to avoid the CRC failure. Then you edited data will be accepted when the bootloader reads the flash sector.
CU, Falk

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/