Re: [partial-reconfig] Modular Design in ISE 6.2 environment

[jagron@xxxxxxxxxxx]

Remy:

  I have been working on the same sort of thing only with 6.3 and 7.1 and
I have created some documentation about how to create a partially
reconfigurable modular design using EDK and ISE.  The documentation can
be found at this address:

http://wiki.ittc.ku.edu/rtrjvm/EDK_and_MD

I have created this b/c the process is very cumbersome, but hopefully this
documentation will help you and others.


-Jason Agron, University of Kansas




> Dear All,
>
> I'm working actually in a partially reconfigurable design starting from
> EDK 6.2 and export to ISE 6.2 in order execute the modular design flow as
> described in xapp 290 and chapter 4 of ISE developers guide. My question
> if is possible to execute the Xilinx Modular Design in ISE environment
> (starting the creation of the necessary directory structure trought the
> final assembly) or it's possible only in the command line window?
>
> Thanks in advance,
>
> ==================================================================================
> Remy Eskinazi
> PhD Student - Informatics Center
> Federal University of Pernambuco
> Recife - PE - Brazil
> res@cin.ufpe.br
> Phone +55-81-2126.8430 R - 4010
>>>Research Interests: Reconfigurable Systems, Field Programable Devices,
> SOCs, Microcontrollers Architectures<<
> ==================================================================================
>
>
>
> ___________________________
> partial-reconfig mailing list
> partial-reconfig@itee.uq.edu.au
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/partial-reconfig/
>


___________________________
partial-reconfig mailing list
partial-reconfig@itee.uq.edu.au
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/