ETSG
Published on ETSG (https://www.itee.uq.edu.au/etsg)

Home > Laboratory Information > Electronics Engineering Lab > PCB Design Requirements

 


Externally Manufactured Boards

 

PCB files are sent directly to the manufacturer for processing

Basic Manufacturing Considerations

  • Method is suitable for high density design
  • Multiple layers (up to 10) available
  • Through hole plating is available
  • Solder mask is available upon request
  • Silver or gold plating is available
  • Minimum clearance between all objects is 6mil
  • Average turn around time is approximately 5 days
  • Refer to the relevant design requirements [1]
  • Slot sizes availble are: 0.6, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.9, 2.0 mm (other sizes may be interpolated)


 


Source URL: https://www.itee.uq.edu.au/etsg/pcb-design-requirements

Links:
[1] http://www.pcbzone.net/user/faq.aspx